Subaru Legacy (2005 year). Service manual — part 674
6MT-43
MANUAL TRANSMISSION AND DIFFERENTIAL
Back-up Light Switch
10.Back-up Light Switch
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-34, REMOVAL, Manual
Transmission Assembly.>
2) Disconnect the back-up light switch connector.
3) Remove the back-up light switch.
B: INSTALLATION
1) Install the back-up light switch.
NOTE:
Use a new gasket.
Tightening torque:
32 N
⋅
m (3.3 kgf-m, 23.6 ft-lb)
2) Connect the back-up light switch connector.
3) Install the manual transmission assembly into
vehicle. <Ref. to 6MT-36, INSTALLATION, Manual
Transmission Assembly.>
(A) Back-up light switch connector (White)
(B) Neutral position switch connector (Black)
(C) Clip
(A) Back-up light switch
(B) Neutral position switch
MT-00471
(A)
(B)
(C)
(C)
MT-00472
(A)
(B)
(A) Back-up light switch
(B) Neutral position switch
(A) Back-up light switch connector (White)
(B) Neutral position switch connector (Black)
(C) Clip
MT-00472
(A)
(B)
MT-00471
(A)
(B)
(C)
(C)
6MT-44
MANUAL TRANSMISSION AND DIFFERENTIAL
Back-up Light Switch
C: INSPECTION
1) Disconnect the ground cable from battery.
2) Disconnect the transmission harness and chas-
sis harness.
3) Measure the resistance between back-up light
switch terminals. If it is not within specification, re-
place the back-up light switch.
(A) Transmission connector
Gear shift position
Terminal No.
Specification
Back-up position
2 and 4
Less than 1
Ω
Other positions
More than 1 M
Ω
(A)
MT-00473
1
2
3
4
MT-00474
6MT-45
MANUAL TRANSMISSION AND DIFFERENTIAL
Neutral Position Switch
11.Neutral Position Switch
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-34, REMOVAL, Manual
Transmission Assembly.>
2) Disconnect the neutral position switch connector
and clip.
3) Remove the neutral position switch.
B: INSTALLATION
1) Install the neutral position switch.
NOTE:
Use a new gasket.
Tightening torque:
32 N
⋅
m (3.3 kgf-m, 23.6 ft-lb)
2) Connect the neutral position switch connector
and clip.
3) Install the manual transmission assembly into
vehicle. <Ref. to 6MT-36, INSTALLATION, Manual
Transmission Assembly.>
(A) Back-up light switch connector (White)
(B) Neutral position switch connector (Black)
(C) Clip
(A) Back-up light switch
(B) Neutral position switch
MT-00471
(A)
(B)
(C)
(C)
MT-00472
(A)
(B)
(A) Back-up light switch
(B) Neutral position switch
(A) Back-up light switch connector (White)
(B) Neutral position switch connector (Black)
(C) Clip
MT-00472
(A)
(B)
MT-00471
(A)
(B)
(C)
(C)
6MT-46
MANUAL TRANSMISSION AND DIFFERENTIAL
Neutral Position Switch
C: INSPECTION
1) Disconnect the ground cable from battery.
2) Disconnect the transmission harness and chas-
sis harness.
3) Measure the resistance between neutral posi-
tion switch terminals. If it is not within specification,
replace the neutral position switch.
(A) Transmission connector
Gear shift position
Terminal No.
Specification
Neutral position
1 and 3
Less than 1
Ω
Other positions
More than 1 M
Ω
(A)
MT-00473
1
2
3
4
MT-01089
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст