Subaru Legacy (2005 year). Service manual — part 673
6MT-39
MANUAL TRANSMISSION AND DIFFERENTIAL
Manual Transmission Assembly
26) Install the air intake chamber. <Ref. to
IN(H6DO)-7, INSTALLATION, Air Intake Cham-
ber.>
27) Install the collector cover.
28) Connect the ground cable to battery.
6MT-40
MANUAL TRANSMISSION AND DIFFERENTIAL
Preparation for Overhaul
7. Preparation for Overhaul
A: PROCEDURE
1) Clean oil, grease, dirt and dust from transmis-
sion.
2) Attach the transmission to ST.
ST
18632AA000
STAND ASSY
3) Rotating parts should be coated with oil prior to
assembly.
4) All disassembled parts, if to be reused, should
be assembled in the original positions and direc-
tions.
5) Always use new ones for gaskets, lock washers
and lock nut.
6) Liquid gasket should be used where specified to
prevent leakage.
MT-00468
ST
ST
ST
6MT-41
MANUAL TRANSMISSION AND DIFFERENTIAL
Air Breather Hose
8. Air Breather Hose
A: REMOVAL
Disconnect the air breather hose.
B: INSTALLATION
Connect the air breather hose.
C: INSPECTION
Check that the hose is not cracked or clogged.
MT-01091
MT-01091
6MT-42
MANUAL TRANSMISSION AND DIFFERENTIAL
Oil Pipe
9. Oil Pipe
A: REMOVAL
Remove the oil pipe.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new gasket.
Tightening torque:
32 N
⋅
m (3.3 kgf-m, 23.6 ft-lb)
C: INSPECTION
1) Check there is no damage on pipe. If there is
damage, replace the pipe.
2) Check the connection of pipe for oil leakage. If
there is oil leakage, replace the gasket.
MT-00470
MT-00470
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст