Subaru Legacy (2005 year). Service manual — part 261
IN(H4DOTC)-3
INTAKE (INDUCTION)
General Description
2. INTAKE DUCT
(1)
PCV hose ASSY
(7)
Vacuum hose
(13)
Brake booster hose
(2)
Intake manifold
(8)
PCV pipe
(3)
Solenoid valve bracket ASSY
(9)
Vacuum hose
Tightening torque: N
⋅
m (kgf-m, ft-lb)
(4)
Intake duct
(10)
Air by-pass pipe
T1: 6.5 (0.66, 4.8)
(5)
Engine harness ASSY
(11)
Clamp
T2: 19 (1.9, 13.7)
(6)
Vacuum hose
(12)
Vacuum hose
IN-00214
T2
(1)
(2)
(2)
(9)
(8)
(6)
(10)
(12)
(11)
(13)
(7)
(5)
(3)
(4)
T2
T1
T1
T2
IN(H4DOTC)-4
Vehicle-id:
SIE-id:S144001a05:A:COMPONENT
∼
INTAKE (INDUCTION)
General Description
3. INTERCOOLER
(1)
Intercooler
(4)
Intake duct
Tightening torque: N
⋅
m (kgf-m, ft-lb)
(2)
Gasket
(5)
Clamp
T1: 3.0 (0.3, 2.2)
(3)
Air by-pass valve
T2: 6.5 (0.66, 4.8)
T3: 16 (1.6, 11.8)
IN-00215
T3
(1)
(4)
(5)
(2)
(3)
T2
T1
IN(H4DOTC)-5
INTAKE (INDUCTION)
General Description
4. TURBOCHARGER
(1)
Oil inlet pipe
(4)
Water pipe
Tightening torque: N
⋅
m (kgf-m, ft-lb)
(2)
Metal gasket
(5)
Gasket
T1: 4.7 (0.48, 3.5) (AT model)
6.5 (0.66, 4.8) (MT model)
(3)
Turbocharger
(6)
Oil outlet pipe
T2: 5.0 (0.51, 3.7)
T3: 23 (2.3, 17.0)
T4: 16 (1.6, 11.8)
T2
T1
T1
T3
(1)
(2)
(6)
(5)
(2)
(2)
(2)
(2)
T4
(4)
IN-00216
(3)
IN(H4DOTC)-6
Vehicle-id:
SIE-id:S144001a03:B:CAUTION
∼
INTAKE (INDUCTION)
General Description
B: CAUTION
• Wear work clothing, including a cap, protective
goggles, and protective shoes during operation.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust and dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Be careful not to burn yourself, because each
part on the vehicle is hot after running.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before disconnecting electrical connectors of
sensors or units, be sure to disconnect the ground
cable from battery.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст