Subaru Legacy (2005 year). Service manual — part 260
EC(H4DOTC)-7
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
Two-way Valve
6. Two-way Valve
A: REMOVAL
1) Lift-up the vehicle.
2) Disconnect the evaporation hoses from two-way
valve.
3) Remove the two-way valve as a unit with bracket
from body.
4) Remove the two-way valve from bracket.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.5 N
⋅
m (0.76 kgf-m, 5.5 ft-lb)
C: INSPECTION
Make sure the hoses are not cracked or loose.
EC-00221
EC(H4DOTC)-8
Vehicle-id:
SIE-id:S140976a18:A:REMOVAL
∼
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
PCV Valve
7. PCV Valve
A: REMOVAL
1) Remove the intake manifold.
<Ref. to FU(H4DOTC)-12, REMOVAL, Intake Man-
ifold.>
2) Remove the PCV valve from intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Apply liquid gasket to the bolt threads of PCV
valve.
Liquid gasket:
THREE BOND 1105 (Part No. 004403010) or
equivalent
Tightening torque:
23 N
⋅
m (2.35 kgf-m, 17.0 ft-lb)
EC-00222
INTAKE (INDUCTION)
IN(H4DOTC)
Page
General Description . . . . . . . . . . . . . . . . . . . . . 2
Air Cleaner Element . . . . . . . . . . . . . . . . . . . . . 7
Air Cleaner Case. . . . . . . . . . . . . . . . . . . . . . .8
Air Intake Duct. . . . . . . . . . . . . . . . . . . . . . . .9
Resonator Chamber. . . . . . . . . . . . . . . . . . . . ..10
Intake Duct . . . . . . . . . . . . . . . . . . . . . . . . 11
Intercooler . . . . . . . . . . . . . . . . . . . . . . . . .12
Turbocharger. . . . . . . . . . . . . . . . . . . . . . . .14
Air By-pass Valve. . . . . . . . . . . . . . . . . . . . . ..16
IN(H4DOTC)-2
Vehicle-id:
SIE-id:S144001a05:A:COMPONENT
∼
INTAKE (INDUCTION)
General Description
1. General Description
A: COMPONENT
1. AIR CLEANER
(1)
Mass air flow and intake air tem-
perature sensor
(7)
Air cleaner case (front)
Tightening torque: N
⋅
m (kgf-m, ft-lb)
(8)
Air intake duct
T1: 1.0 (0.10, 0.74)
(2)
Air cleaner case (rear)
(9)
Clip
T2: 2.5 (0.25, 1.8)
(3)
Clip
(10)
Resonator chamber
T3: 6.0 (0.61, 4.4)
(4)
Air intake boot
(11)
Cushion
T4: 7.5 (0.76, 5.5)
(5)
Clamp
(12)
Spacer
(6)
Air cleaner element
(13)
Cushion
IN-02016
T3
(6)
(8)
(7)
(4)
(3)
(3)
(2)
(1)
T1
T2
(5)
(5)
T2
(9)
(11)
(12)
(11)
(12)
T4
(13)
(10)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст