Subaru Legacy III (2000-2003 year). Service manual — part 982
EI-30
EXTERIOR/INTERIOR TRIM
FRONT DOOR TRIM
11.Front Door Trim
A: REMOVAL
1) Pull up inner remote cover toward you to remove
upper hook. Pull down it to remove lower claw. Re-
move inner remote cover.
2) Remove two hook (A) of switch panel to remove
power window main switch.
3) Disconnect electrical connectors from power
window main switch and mirror switch.
4) Remove three screws and clips.
5) Remove gusset cover. Disconnect electrical
connectors to remove speaker.
6) Remove seven clips (A) of trim panel using clip
remover to remove trim panel.
B: INSTALLATION
Install in the reverse order of removal.
EI-00167
EI-00168
( A )
:
EI-00169
EI-00170
EI-00171
EI-00172
: ( A )
EI-31
EXTERIOR/INTERIOR TRIM
REAR DOOR TRIM
12.Rear Door Trim
A: REMOVAL
CAUTION:
Do not apply excessive force to clip. Otherwise
the clip may be broken.
1) Pull up inner remote cover toward you to remove
upper hook. Pull down it to remove lower claw. Re-
move inner remote cover.
2) Remove two hook (A) of switch panel to remove
power window sub switch and disconnect electrical
connector.
3) Remove three screws and clips.
4) Remove seven clips (A) of trim panel using clip
remover to remove trim panel.
B: INSTALLATION
Install in the reverse order of removal.
EI-00167
EI-00174
: ( A )
EI-00175
EI-00176
: ( A )
EI-32
EXTERIOR/INTERIOR TRIM
GLOVE BOX
13.Glove Box
A: REMOVAL
1) Remove stoppers.
2) Loosen screws to remove glove box.
B: INSTALLATION
Install in the reverse order of removal.
EI-00177
EI-00178
EI-33
EXTERIOR/INTERIOR TRIM
ROOF RAIL
14.Roof Rail
A: REMOVAL
1) Remove roof trim. <Ref. to EI-42, REMOVAL, Roof Trim.>
2) Remove five mounting nuts and then detach roof rail carefully.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.46 ft-lb)
EI-00179
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст