Subaru Legacy III (2000-2003 year). Service manual — part 921
LI-18
LIGHTING SYSTEM
FRONT TURN SIGNAL LIGHT BULB
14.Front Turn Signal Light Bulb
A: REMOVAL
1) Remove headlight assembly. <Ref. to LI-15, RE-
MOVAL, Headlight Assembly.>
2) Turn the socket and remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
LI-00136
LI-19
LIGHTING SYSTEM
PARKING LIGHT BULB
15.Parking Light Bulb
A: REMOVAL
1) Remove headlight assembly. <Ref. to LI-15, RE-
MOVAL, Headlight Assembly.>
2) Turn the socket and remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
LI-00137
LI-20
LIGHTING SYSTEM
FRONT FOG LIGHT ASSEMBLY
16.Front Fog Light Assembly
A: REMOVAL
1. EXCEPT OUTBACK
1) Disconnect ground cable from battery.
2) Remove two clips and lower the mudguard.
3) Disconnect harness connector.
4) Remove mounting bolts, and then detach fog
light assembly.
2. OUTBACK
1) Disconnect ground cable from battery.
2) Turn stone guard counterclockwise, and then re-
move it.
3) Remove mounting bolts.
4) Remove two clips and lower the mudguard.
5) Disconnect harness connector (a).
6) Remove nut (b) then detach fog light assembly.
B: INSTALLATION
Install in the reverse order of removal.
LI-00084
LI-00085
LI-00086
LI-00087
LI-00084
LI-00088
( a )
( b )
LI-21
LIGHTING SYSTEM
FRONT FOG LIGHT BULB
17.Front Fog Light Bulb
A: REMOVAL
1. EXCEPT OUTBACK
1) Disconnect ground cable from battery.
2) Remove the two clips and lower the mudguard.
3) Disconnect harness connector.
4) Remove back cover (A).
5) Remove spring retainer then detach fog light
bulb.
2. OUTBACK
1) Remove fog light assembly. <Ref. to LI-20,
OUTBACK, REMOVAL, Front Fog Light Assem-
bly.>
2) Disconnect harness connector.
3) Loosen screws and turn the bulb assembly
counterclockwise, and then detach the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2, PRE-
CAUTIONS, General Description.>
3) If NG, replace the bulb with a new one.
LI-00084
LI-00089
( A )
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст