Infiniti G37 Coupe. Manual — part 703
![](/vehicles/zatt/keash/ckiif/jerraunas.png)
EXT-26
< ON-VEHICLE REPAIR >
FENDER PROTECTOR
1.
Remove bolt (A) of rear wheel house protector rear end.
2.
Remove screw (A) of rear wheel house protector located center
mud guard.
3.
Remove rear wheel house protector mounting nuts and then remove rear wheel house protector.
INSTALLATION
Install in the reverse order of removal.
JMKIA1239ZZ
JMKIA1240ZZ
![](/vehicles/zatt/keash/ckiif/enndza.png)
CENTER MUD GUARD
EXT-27
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
CENTER MUD GUARD
Exploded View
INFOID:0000000001677486
Removal and Installation
INFOID:0000000001677487
REMOVAL
1.
Remove wind deflector mounting clip (A) and nuts (B), and then
remove wind deflector (1).
1.
Body side outer
2.
Grommet
3.
Wind deflector
4.
Center mud guard
JMKIA1241ZZ
JMKIA1242ZZ
![](/vehicles/zatt/keash/ckiif/xyongor.png)
EXT-28
< ON-VEHICLE REPAIR >
CENTER MUD GUARD
2.
Remove screw (A) and bolt (B) of center mud guard front end.
3.
Remove screw (A) of center mud guard rear end.
4.
Remove screws of center mud guard underside.
5.
Fully open front door and rear door.
6.
Remove clips from back of center mud guard using remover tool.
7.
Remove center mud guard from body side.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
When installing center mud guard, make sure that clips are securely fitted in panel holes on body, and
then press them in.
JMKIA0111GB
JMKIA1243ZZ
![](/vehicles/zatt/keash/ckiif/firesofeasaw.png)
FLOOR SIDE FAIRING
EXT-29
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FLOOR SIDE FAIRING
Exploded View
INFOID:0000000001677488
Removal and Installation
INFOID:0000000001677489
REMOVAL
ENGINE LOWER COVER
1.
Remove engine lower cover mounting clips.
2.
Remove engine lower cover mounting bolts with power tool.
3.
Remove engine lower cover.
FRONT UNDER COVER
1.
Remove front under cover mounting clips.
2.
Remove front under cover mounting bolts with power tool.
3.
Remove front under cover.
FLOOR UNDER COVER (LH/RH)
1.
Remove floor under cover mounting clips.
2.
Remove floor under cover mounting bolts and nuts with power tool.
3.
Remove floor under cover.
REAR UNDER COVER (LH/RH)
1.
Remove rear under cover mounting bolts.
1.
Engine lower cover
2.
Front under cover
3.
Floor under cover RH
4.
Floor under cover LH
5.
Rear under cover RH
6.
Rear under cover LH
JMKIA1244ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст