Acura RL (1996-2004 year). Manual — part 578
![](/vehicles/shign/ecital/fofa/aus.png)
Seat Linkage Disassembly
CAUTION: Put on gloves to protect your hands.
8-way power adjustable:
NOTE:
Before removing the front seat, raise the seat cushion
to its maximum height.
To remove the slide motor and slide gearbox, slide
the front seat backward fully.
for the power seat wire harness
installation.
POWER SEAT
CONTROL UNIT
Apply liquid RECLINE
thread lock. ADJUSTER
RECLINE
MOTOR
5 x 0.8 mm
3 N-m (0.3 kgf-m,
2 Ibf-ft)
8 x 1.25 mm
14 N-m (1.4 kgf-m,
10 Ibf-ft)
Apply liquid thread lock.
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
6 x 1.0 mm
5 N-m (0.5 kgf-m,
4 Ibf-ft)
Apply liquid thread lock.
POWER SEAT
HARNESS
SLIDE
GEARBOX
3.7 N-m (0.38 kgf-m,
2.7 Ibf-ft)
Installation is the reverse of the removal procedure.
SLIDE
MOTOR
NOTE:
Replace the bushings with new ones.
Before installing the slide motor and slide gearbox, align portion (A) as shown.
Grease each lead screw and gear portion of the recline motor.
Check the slide motor, slide gearbox, up-down motor, and recline motor operations.
SLIDE JOINT
CABLE
BUSHING
FRONT UP-DOWN
MOTOR
6 x 1.0 mm
9 N-m (0.9 kgf-m,
7 Ibf-ft)
Apply liquid thread lock.
BUSHING
LINK
LINK
COVER
BUSHING
6 x 1.0 mm
7 N-m (0.7 kgf-m,
5 Ibf-ft)
BUSHING
LINK
COVER
SLIDE/UP-DOWN
ADJUSTER
6 x 1.0 mm
8 N-m (0.8 kgf-m,
6 Ibf-ft)
Apply liquid thread
lock.
8 x 1.25 mm
14 N-m (1.4 kgf-m,
10 Ibf-ft)
HARNESS
HOLDER
6 x 1.0 mm
5 N-m (0.5 kgf-m,
4 Ibf-ft)
Apply liquid
thread lock.
REAR
UP-DOWN
MOTOR
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/donone.png)
Front Seat
Seat Linkage Disassembly (cont'd)
4-way power adjustable:
NOTE: To remove the slide motor and slide gearbox, slide the front seat backward fully.
5 x 0.8 mm
3 N-m (0.3 kgf-m,
21 Ibf-ft)
RECLINE
MOTOR
8 x 1.25 mm
14 N-m (1.4 kgf-m,
10 Ibf-ft)
6 x 1.0 mm
8 N-m (0.8 kgf-m
6 Ibf-ft)
Apply liquid
thread lock.
8 x 1.25 mm
14 N-m (1.4 kgf-m,
10 Ibf-ft)
PIVOT
BRACKET
SEAT BELT
BUCKLE
BRACKET
INNER SLIDE
ADJUSTER
10 x 1.25 mm
25 N-m (2.5 kgf-m,
18 Ibf-ft)
SLIDE
GEARBOX
6 x 1.0 mm
9 N-m (0.9 kgf-m,
7 Ibf-ft)
Apply liquid thread lock.
3.7 N-m (0.38 kgf-m,
2.7 Ibf-ft)
Installation is the reverse of the removal procedure.
SLIDE
MOTOR
NOTE:
Before installing the slide motor and slide gearbox, align portion as shown.
Grease the slide lead screws and gear portion of the recline motor.
Check the slide motor, slide gearbox, and recline motor operations.
6 x 1.0 mm
8 N-m (0.8 kgf-m,
6 Ibf-ft)
Apply liquid thread lock.
OUTER SLIDE
ADJUSTER
RECLINE
ADJUSTER
Apply liquid thread
lock.
6 x 1.0 mm
9 N-m (0.9 kgf-m,
7 Ibf-ft)
Apply liquid
thread lock.
SLIDE JOINT
CABLE
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/zyjes.png)
Seat Wire Harness Installation
NOTE: When assembling the front seat, install the seat
wire harness and connectors correctly.
8-way power adjustable (with seat heater and side
airbag):
: Clip locations
SIDE AIRBAG
('99-01 models)
SEAT-BACK
SEAT-BACK
HEATER
HARNESS
<B> <A>
RECLINE MOTOR
CONNECTOR
<C>
HOOK
SEAT-BACK
HEATER
CONNECTOR
To seat belt
buckle.
To power
seat
switch.
HOOK
SEAT
CUSHION
COVER
WIRE
TIES
Power seat wire harness location:
View from under
REAR UP-DOWN
SENSOR CONNECTOR
FRONT UP-DOWN
SENSOR CONNECTOR
View from top
FRONT UP-DOWN
MOTOR CONNECTOR
HARNESS
HOLDER
REAR UP-DOWN
MOTOR CONNECTOR
SEAT LINKAGE
SEAT LINKAGE
SLIDE SENSOR
CONNECTOR
SLIDE
MOTOR
CONNECTOR
SLIDE
MOTOR
CONNECTOR
To power seat
switch.
To power seat
switch.
SLIDE POWER SEAT
SENSOR CONTROL
CONNECTOR UNIT
WIRE
TIES
WIRE
TIES
To seat
cushion
heater.
<A>
<B>
<C>
HARNESS
HOLDER
POWER
SEAT
CONNECTOR
Screw location
Clip locations
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/jew.png)
Front Seat
Seat Wire Harness Installation (cont'd)
4-way power adjustable (with seat heater and side airbag):
: Screw location
: Clip locations
SEAT-BACK
SIDE AIRBAG
('99 - 00 models)
WIRE
TIES
OPDS UNIT
('99 - 00 models)
SEAT-BACK
HEATER
HARNESS
HOOKS
SLIDE MOTOR
CONNECTOR
To power
seat
switch.
SEAT-BACK
HEATER
CONNECTOR
To seat belt
buckle.
To seat
cushion
heater.
SEAT
CUSHION
COVER
WIRE
TIES
WIRE
TIES
<A> <B><D><C>
WIRE
TIES
<A>
<C>
<D>
<B>
Main Menu
Table of Contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст