Acura RL (1996-2004 year). Manual — part 450
1st Gear One-way Clutch
Disassembly/lnspection/Reassembly
1. Remove the set plate from the countershaft 1st
gear.
2. Remove the one-way clutch by prying it up with the
end of a screwdriver.
COUNTERSHAFT 1ST GEAR
RETAINER
TAB
SCREWDRIVER
COUNTERSHAFT
1ST GEAR
3. Inspect the parts as follows:
COUNTERSHAFT
2ND GEAR ASSEMBLY
ONE-WAY CLUTCH HUB
Inspect for wear and
scoring.
SET PLATE
Inspect for wear.
THRUST NEEDLE
BEARING
Inspect for galling and
rough movement.
ONE-WAY CLUTCH
Inspect for damage and
faulty movement.
COUNTERSHAFT
1ST GEAR
Inspect for wear and
scoring.
Assemble the one-way clutch, thrust needle bearing
and set plate on the countershaft 1st gear.
Hold countershaft 1st gear, and turn the counter-
shaft 2nd gear assembly in the direction shown to
be sure it turns freely. Also make sure the counter-
shaft 2nd gear assembly does not turn in the oppo-
site direction.
COUNTER-
SHAFT
1ST GEAR
COUNTERSHAFT
2ND GEAR
ASSEMBLY
ONE-WAY CLUTCH
Main Menu
Table of Contents
Clutch
Illustrated Index
1ST/4TH CLUTCH ASSEMBLY
O-RINGS
Replace.
CHECK VALVE
4TH CLUTCH
PISTON
RETURN SPRING
SPRING RETAINER
SNAP RING
CLUTCH PLATES
Standard thickness:
2.6 mm (0.102 in)
CLUTCH END
PLATE
SNAP RING
CLUTCH DISCS
Standard thickness:
1.94 mm (0.076 in)
CLUTCH DISCS
Standard thickness:
2.34 mm (0.092 in)
SNAP RING
CLUTCH END PLATE
CLUTCH PLATES
Standard thickness:
2.0 mm (0.079 in)
SNAP RING
SPRING RETAINER
RETURN SPRING
DISC SPRING
CLUTCH PISTON
O-RINGS
Replace.
1ST CLUTCH DRUM
4TH CLUTCH DRUM
Main Menu
Table of Contents
Clutch
Illustrated Index (cont'd)
2ND CLUTCH ASSEMBLY
3RD CLUTCH ASSEMBLY
CLUTCH DRUM
O-RINGS
Replace.
CHECK VALVE
CLUTCH PLATES
Standard thickness:
2.0 mm (0.079 in)
CLUTCH END
PLATE
SNAP RING
CLUTCH DISCS
Standard thickness:
2.34 mm (0.092 in)
CLUTCH
PISTON
CLUTCH DISCS
Standard thickness:
1.94 mm (0.076 in)
SNAP RING
CLUTCH END PLATE
CLUTCH PLATES
Standard thickness:
2.0 mm (0.079 in)
SNAP RING
SPRING RETAINER
RETURN SPRING
CLUTCH PISTON
O-RINGS
Replace.
CLUTCH DRUM
DISC SPRING
RETURN SPRING
SPRING RETAINER
SNAP RING
Main Menu
Table of Contents
REVERSE CLUTCH ASSEMBLY
1ST-HOLD CLUTCH ASSEMBLY
SNAP RING
CLUTCH END
PLATE
CLUTCH PLATES
Standard thickness:
2.0 mm (0.079 in)
O-RINGS
Replace.
CLUTCH DRUM
CLUTCH DISCS
Standard thickness:
1.94 mm (0.076 in)
CLUTCH DISCS
Standard thickness:
1.94 mm (0.076 in)
SNAP RING
CLUTCH END PLATE
CLUTCH PLATES
Standard thickness:
2.0 mm (0.079 in)
SNAP RING
SPRING RETAINER
RETURN SPRING
DISC SPRING
CLUTCH PISTON
O-RINGS
Replace.
CLUTCH DRUM
SNAP RING
SPRING RETAINER
RETURN SPRING
DISC SPRING
CLUTCH PISTON
Main Menu
Table of Contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст