Acura RL (1996-2004 year). Manual — part 334
![](/vehicles/shign/ecital/fofa/indalllatrsu.png)
24. Remove the six ignition coils from the left and right
cylinder head covers.
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
IGNITION
COIL
25. Remove the vacuum line mounting bolts from the
right cylinder head cover and intake manifold.
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
VACUUM
LINE
6 x 1.0 mm
12 N-m (1.2 kgf-m, 8.7 Ibf-ft)
26. Remove the EGR pipe.
GASKET
Replace.
EGR PIPE
6 x 1.0 mm
12 N-m (1.2 kgf-m, 8.7 Ibf-ft)
GASKET
Replace.
27. Remove the vacuum hoses, then remove the Intake
Manifold Runner Control (IMRC) solenoid valve/
mount control solenoid valve assembly bracket.
BRACKET
VACUUM
HOSES
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/rog.png)
Cylinder Heads
Removal (cont'd)
28. Remove the wire harness holder mounting bolts.
WIRE HARNESS
HOLDER
6 x 1.0 mm
12 N-m (1.2 kgf-m, 8.7 Ibf-ft)
29. Remove the bolt securing the automatic transmis-
sion fluid (ATF) dipstick tube bracket.
30. Remove the heater hose.
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
HEATER
HOSE
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
31. Remove the vacuum line mounting bolts, wire har-
ness holder and positive crankcase ventilation (PCV)
hose.
PCV HOSE
VACUUM
LINE
32. Remove the EVAP canister hose, EVAP purge
solenoid valve and vacuum hose.
EVAP CONTROL
CANISTER HOSE
EVAP PURGE CONTROL
SOLENOID VALVE
6 x 1.0mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
VACUUM
HOSE
6 x 1.0 mm
12 N-m (1.2 kgf-m, 8.7 Ibf-ft)
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/vey.png)
33. Remove the TCS control valve upper and lower
brackets (see page
).
34 Disconnect the TCS throttle position sensor connec-
tor and TCS throttle actuator connector, then remove
the TCS control valve assembly (see page
).
35. Remove the intake manifold and water passage.
NOTE: Fill the cylinder head intake ports with clean
shop towels to prevent foreign materials from get-
ting into the cylinders.
INTAKE
MANIFOLD
WATER
PASSAGE
GASKETS
Replace.
36. Remove the covers, then remove the left and right
).
37. Remove the balancer belt and timing belt (see page
).
38. Remove the three bolts securing the alternator
bracket.
ALTERNATOR
BRACKET
6 x 1.0 mm
12 N-m (1.2 kgf-m,
8.7 Ibf-ft)
39. Remove the two bolts securing the P/S pump bracket.
P/S PUMP
BRACKET
10 x 1.25 mm
44 N-m (4.5 kgf-m,
33 Ibf-ft)
8 x 1.25 mm
22 N-m (2.2 kgf-m,
16 Ibf-ft)
O-RING
Replace.
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/makutowloula.png)
Cylinder Heads
Removal (cont'd)
40. Remove the left and right camshaft pulleys, then
remove the back covers.
RIGHT
CAMSHAFT PULLEY
8 x 1.25 mm
31 N-m (3.2 kgf-m,
23 Ibf-ft)
LEFT
CAMSHAFT PULLEY
8 x 1.25 mm
31 N-m (3.2 kgf-m,
23 Ibf-ft)
BACK COVER
BACK COVER
41. Remove the left and right cylinder head covers.
6 x 1.0 mm
12 N-m (1.2 kgf-m, 8.7 Ibf-ft)
CYLINDER
HEAD COVER
42. Remove the cylinder head bolts, then remove the
cylinder heads.
CAUTION: To prevent warpage, unscrew the bolts
in sequence 1/3 turn at a time; repeat the sequence
until all bolts are loose.
CYLINDER HEAD BOLTS LOOSENING SEQUENCE:
Main Menu
Table of Contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст