Acura RL (1996-2004 year). Manual — part 621
![](/vehicles/shign/ecital/fofa/yop.png)
Fog Lights
Switch Test
NOTE: You can also test the switch by using the self-
diagnosis function (mode 2). (See page
.)
1. Remove the fog light switch, then disconnect the
connector.
Without Navigation System:
FOG
LIGHT SWITCH
BULB (0.84 W)
5P CONNECTOR
With Navigation System:
2. Check for continuity between the terminals in each
switch position according to the table.
'99-01 models with Navigation System
BULB (0.84 W)
FOG
LIGHT SWITCH
CONNECTOR
'96 - 98 models
'99 - 01 models
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/drlas.png)
Adjustment
1. Adjust the fog lights to local requirements by turn-
ing the adjusters.
'96-98 models:
ADJUSTER
Replacement
CAUTION: Fog lights become very hot in use; do not
touch them or the attaching hardware immediately
after they have been turned off.
1. Remove the mounting bolt.
2P CONNECTOR
MOUNTING
BOLT
FOG LIGHT
(Bulb: 55 W)
2. Remove the fog light assembly, then disconnect the
2P connector.
3. Install the fog light in the reverse order of removal.
4. After replacement, adjust the fog lights to local
requirements.
'99 - 01 models:
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/pye.png)
3. Take the lens off, then replace the bulb.
3. Take the lens off, then replace the bulb.
Replacement
'96 - 98 models:
1. Remove the two screws from the license plate light
assembly.
2. Pull the light out, and disconnect the 2P connector
from the light.
License Plate Light
2P CONNECTOR
'99 - 01 models:
1. Slide and pull out the license plate light.
2. Disconnect the 2P connector from the light.
2P CONNECTOR
BULB (5W)
LENS
BULB (3CP)
LENS
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/sear.png)
High Mount Brake Light
Replacement
).
2. Loosen the mounting bolts.
HIGH MOUNT BRAKE LIGHT
3. Remove the high mount brake light.
2P CONNECTOR
SOCKET
MOUNTING
BOLT
Main Menu
Table of Contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст