Mazda Training manual — part 189
![](/vehicles/rke/hty/ntwithamb/owi.png)
TC001-18-01H
INTRODUCTION TO M-MDS
03 - PDA Navigation
Activity 03- Page 3
Activity 03
(Continued)
6. Tap Power.
7. What is the main battery power remaining
on your PDA?
%
8. Tap the Advanced tab at the bottom of
the screen.
9. Verify Turn off device if not used for
is checked.
The battery power remaining must be
50% or more for PDS to properly
function.
![](/vehicles/rke/hty/ntwithamb/ingest.png)
TC001-18-01H
INTRODUCTION TO M-MDS
03 - PDA Navigation
Activity 03- Page 4
Activity 03
(Continued)
10. Tap the drop-down list and select 5 minutes.
Tap OK at the top right corner to save your
selection and exit the screen.
11. Tap
Brightness.
12. Press and hold down the stylus On battery
power and
drag the slider to Bright.
Drag slider to Bright
on the right
![](/vehicles/rke/hty/ntwithamb/yooli.png)
TC001-18-01H
INTRODUCTION TO M-MDS
03 - PDA Navigation
Activity 03- Page 5
Activity 03
(Continued)
13. Tap
the
Battery Power tab.
14. Set
Dim if device is idle for more than
to 5 minutes.
15. Tap
OK to save your selection and exit
the screen.
![](/vehicles/rke/hty/ntwithamb/zisq.png)
TC001-18-01H
INTRODUCTION TO M-MDS
03 - PDA Navigation
Activity 03- Page 6
Activity 03
(Continued)
16. Tap
X at the upper right corner to exit the
Settings screen.
The main screen displays when you have
saved your selections and exited the Settings screen.
Your PDA’s main screen
may look slightly
different than this
example.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст