Defender (1999-2002). Manual — part 99
![](/vehicles/onond/ycatth/que/oby.png)
CHASSIS AND BODY
25
REPAIR
Refit
12. Position panel assembly, fit bolts and nut and
tighten to 10 Nm (7lbf.ft).
13. Connect multiplug to motor.
14. Secure harness clips and sleeve.
15. Connect interior handle link to latch and secure
with clip.
16. Connect multiplug to solenoid, locate solenoid to
mounting panel and tighten screws.
17. Fit and secure link.
18. Remove wedges, lower glass and locate to
regulator. Fit bolts and tighten to 6 Nm (4 lbf.ft).
19. Raise and lower glass to check operation.
20. Fit plastic sheet. See this Section.
21. Adjust door lock solenoid. See ELECTRICAL,
Adjustment.
PANEL - MOUNTING - REAR DOOR - FROM 02MY
Service repair no - 76.11.29
Remove
1. Remove plastic sheet. See this Section.
2. Lower glass and remove 2 bolts securing door
glass to regulator.
3. Release glass from regulator, raise and wedge
in raised position.
![](/vehicles/onond/ycatth/que/xarerndy.png)
76
CHASSIS AND BODY
26
REPAIR
4. Release clip, detach and remove lock solenoid
link.
5. Release clip and disconnect interior handle link
from latch mechanism.
6. Remove clip and disconnect sill button link.
7. Release clips securing harness to panel.
8. Disconnect multiplug from solenoid.
9. Release harness sleeve and withdraw harness
from door.
10. Remove 5 bolts and 1 nut securing panel.
11. Remove panel assembly.
Refit
12. Position door mounting panel assembly, fit bolts
and nut and tighten to 10 Nm (7lbf.ft).
13. Connect multiplug to solenoid.
14. Secure harness clips and sleeve.
15. Connect interior handle link to latch and secure
with clip.
16. Connect link to sill button and fit clip.
17. Fit and secure solenoid link.
18. Remove wedges, lower glass and locate to
regulator. Fit bolts and tighten to 6 Nm (4 lbf.ft).
19. Raise and lower glass to check operation.
20. Fit plastic sheet. See this Section.
![](/vehicles/onond/ycatth/que/jusod.png)
CHASSIS AND BODY
27
REPAIR
FACIA CONSOLE - FROM 02MY
Service repair no - 76.25.03
Remove
1. Disconnect battery earth lead. See
ELECTRICAL, Repair.
2. Remove radio. See ELECTRICAL, Repair.
3. Remove 4 screws securing instrument pack and
release pack from fascia.
4. Disconnect 2 multiplugs from warning lamp
panel.
5. Disconnect instrument pack multiplug from main
harness.
6. Remove instrument pack.
7. Remove 3 screws securing heater control and
release control from fascia.
8. Carefully prise Land Rover decal from grab
handle.
9. Remove 2 screws securing grab handle and
remove handle.
10. Remove 4 screws and remove demister vents.
![](/vehicles/onond/ycatth/que/xinlularesar.png)
76
CHASSIS AND BODY
28
REPAIR
11. Remove 5 screws securing crash pad and
remove pad.
12. Remove 5 screws and release fascia console.
13. Disconnect Lucar connection and multiplug from
cigar lighter.
14. Disconnect multiplugs from remaining switches
and remove console.
15. Remove operating knob from light switch.
16. Remove nut securing light switch and remove
switch from console.
17. Release cigar lighter body and remove from
console.
18. Remove switches from console.
19. Release tabs and remove radio mounting
bracket.
Refit
20. Fit radio bracket and secure with tabs.
21. Fit and secure cigar lighter body to console.
22. Fit light switch and secure with nut.
23. Fit operating knob to switch.
24. Fit remaining switches to console.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст