Defender. Manual — part 169

36. Remove the 2 bearing retaining plates.

Remove the 8 bolts.

37. Using the special tool, remove the input shaft bearing.

38. Using the special tool, remove the countershaft bearing.

39. NOTE: Note the positions of the components on removal.

Remove the components in the sequence shown.

1. Reverse gear idler mounting bolt.

2. Reverse gear idler mounting.

3. Reverse gear idler.

4. Countershaft roller bearing.

40. Remove the output shaft bearing retaining plate.

40. Remove the output shaft bearing retaining plate.

Remove the 4 bolts.

41. Using the special tool, remove the output shaft bearing.

42. Using the special tools, remove the countershaft bearing

outer race.

43. Remove the output shaft pilot bearing and the 5th gear

synchronizer assembly from the output shaft.

Remove and discard the snap ring.

44. Using the special tool, remove the 6th gear

synchronizer/hub assembly from the output shaft.

45. Using the special tool, remove the 5th gear from the

countershaft.

46. Using the special tool, remove the 6th gear from the

countershaft.

47. Remove the 3rd gear from the countershaft.

48. Remove the 3rd/4th gear synchronizer snap ring from the

48. Remove the 3rd/4th gear synchronizer snap ring from the

countershaft.

49. Using the special tool, remove the 4th gear and

synchronizer assembly from the countershaft.