Defender. Manual — part 167
![](/vehicles/onond/qug/lecmbuttig/gore.png)
8. Remove and discard the input shaft snap ring.
9. Using the special tool, make a hole in the countershaft
seal.
10. Using the special tools, remove and discard the
countershaft seal.
11. NOTE: Make sure that a gear is selected.
Remove the countershaft bolt.
12. Remove the special tool.
![](/vehicles/onond/qug/lecmbuttig/ueser.png)
12. Remove the special tool.
13. Using the special tools, remove the output shaft flange.
14. Using the special tool, remove the selector shaft seal.
15. Using the special tools, remove the output shaft seal.
16. Remove the 3 LH selector fork bolts.
![](/vehicles/onond/qug/lecmbuttig/reath.png)
16. Remove the 3 LH selector fork bolts.
17. Remove the 3 RH selector fork bolts.
18. Using the special tools, remove the 3 selector shaft
detents.
19. Remove the 2 selector shaft detents.
20. Remove the 13 bolts.
![](/vehicles/onond/qug/lecmbuttig/coher.png)
20. Remove the 13 bolts.
21. Using the special tools, remove the transmission housing.
22. Remove the magnet.
23. Remove the reverse gear selector.
24. Remove the 1st/2nd gear selector.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст