Frelander 2. Manual — part 265

Remove the generator coupling.

Special Tool(s):

303-1221

5.

Remove and discard the seal.

6.

Installation

Install the seal onto the special tool.

Special Tool(s):

303-1222

1.

Install the new seal.

Special Tool(s):

303-1222

2.

Install the generator coupling.

Special Tool(s):

303-1220

Torque: 44 Nm

3.

Install the generator.

Refer to:

Generator - I6 3.2L Petrol

(414-02 Generator and

Regulator, Removal and Installation).

4.

Connect the battery ground cable and install the cover.

Refer to:

Specifications

(414-00 Battery and Charging System -

General Information, Specifications).

5.

Accessory Drive - I6 3.2L Petrol - Accessory Drive Shaft Rear Seal

Removal and Installation

Special Tool(s)

303-1227
Installer, Auxiliary Drive Seal

Removal

Remove the cover and disconnect the battery ground cable.

Refer to:

Specifications

(414-00 Battery and Charging System -

General Information, Specifications).

1.

Remove the accessory drive pulley.

Refer to:

Accessory Drive Pulley

(303-05A Accessory Drive - I6 3.2L

Petrol, Removal and Installation).

2.

3.

CAUTION: Discard the seal.

3.

Installation

Install the seal to the special tool

Special Tool(s):

303-1227

Remove the seal guide.

1.

2.

CAUTION: Make sure that the mating faces are

clean and free of corrosion and foreign material.

Install the special tool and seal assembly into
the accesory drive shaft.
Install the seal.

2.

Install the accessory drive pulley.

Refer to:

Accessory Drive Pulley

(303-05A Accessory Drive - I6 3.2L

Petrol, Removal and Installation).

3.

Connect the battery ground cable and install the cover.

Refer to:

Specifications

(414-00 Battery and Charging System -

General Information, Specifications).

4.