Frelander 2. Manual — part 263
![](/vehicles/onond/oloi/toor/move.png)
Accessory Drive - I6 3.2L Petrol - Accessory Drive Belt Idler Pulley
Removal and Installation
Removal
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Remove the engine cover.
Refer to:
Engine Cover - I6 3.2L Petrol
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
2.
Remove the battery tray.
Refer to:
Battery Tray
(414-01 Battery, Mounting and Cables,
Removal and Installation).
3.
Remove the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
4.
Remove the A/C compressor, lower support bracket.
5.
Using suitable tools, release the accessory drive belt
tension.
6.
![](/vehicles/onond/oloi/toor/yontorinof.png)
Remove the accessory drive belt idler pulley.
7.
Installation
Install the accessary drive belt idler pulley.
Torque: 25 Nm
1.
Install the accessory drive belt.
2.
Install the A/C compressor, lower support bracket.
Torque: 25 Nm
3.
Install the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
4.
Install the battery tray.
Refer to:
Battery Tray
(414-01 Battery, Mounting and Cables,
Removal and Installation).
5.
Install the engine cover.
Refer to:
Engine Cover - I6 3.2L Petrol
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
6.
Connect the battery ground cable and install the cover.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
7.
![](/vehicles/onond/oloi/toor/yey.png)
Accessory Drive - I6 3.2L Petrol - Accessory Drive Pulley
Removal and Installation
Special Tool(s)
303-1278
Aligner, Timing Cover
303-1284
Torx Socket, Accessory Drive Pulley
Removal
• NOTE: Removal steps in this procedure may contain installation details.
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Remove the A/C compressor mounting bracket.
Refer to:
Accessory Drive Component Bracket
(303-05A Accessory
Drive - I6 3.2L Petrol, Removal and Installation).
2.
3.
![](/vehicles/onond/oloi/toor/beve.png)
Special Tool(s):
303-1284
,
303-1278
Torque: 60 Nm
4.
Installation
1.
CAUTION: Make sure that the mating faces are clean and
free of foreign material.
To install, reverse the removal procedure.
1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст