Frelander 2. Manual — part 266
![](/vehicles/onond/oloi/toor/orio.png)
Accessory Drive - I6 3.2L Petrol - Rear End Accessory Drive (READ)
Removal and Installation
Special Tool(s)
303-1487
Cylinder Block Pry Tool
Removal
• NOTE: Removal steps in this procedure may contain installation details.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
2.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
2.
Refer to:
Timing Components Housing
(303-01A Engine - I6 3.2L
Petrol, Removal and Installation).
3.
Refer to:
Generator - I6 3.2L Petrol
(414-02 Generator and
Regulator, Removal and Installation).
4.
5.
6.
![](/vehicles/onond/oloi/toor/ugo.png)
7.
8.
Special Tool(s):
303-1487
9.
![](/vehicles/onond/oloi/toor/yonda.png)
10. NOTE: Make sure that all traces of the old sealant
are removed from the mating faces.
10.
Installation
1.
![](/vehicles/onond/oloi/toor/thes.png)
Stage 1:
Stage 2:
Apply a 2.5mm bead of sealant STC50550
(Loctite 5900) to the areas shown.
2.
Torque:
10 Nm
24 Nm
3.
Torque: 45 Nm
4.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст