Toyota Sequoia (2005). Manual — part 821
![](/vehicles/linovind/vere/fry/tray.png)
SR0VB–04
F08332
SST
Oil
Seal
Bearing
F08333
SST
SST
Bearing
F08335
SST
Bearing
F08334
Bearing
SST
F08336
SST
Bearing
SR–46
–
STEERING
POWER STEERING GEAR
3273
REPLACEMENT
NOTICE:
When using a vise, do not overtighten it.
1.
IF NECESSARY, REPLACE OIL SEAL AND BEARING
(a)
Using SST, press out the oil seal and bearing from the
control valve housing.
SST
09950–60010 (09951–00250),
09950–70010 (09951–07150)
(b)
Coat a new oil seal lip with power steering fluid.
(c)
Using SST, press in the oil seal.
SST
09950–60010 (09951–00180, 09951–00320,
09952–06010), 09950–70010 (09951–07150)
NOTICE:
Make sure to install the oil seal in the correct direction.
(d)
Coat a new bearing with molybdenum disulfide lithium
base grease.
(e)
Using SST, press in the bearing.
SST
09950–60010 (09951–00340),
09950–70010 (09951–07150)
2.
IF NECESSARY, REPLACE 2 BEARINGS
(a)
Using SST, press out the bearing.
SST
09950–60010 (09951–00260),
09950–70010 (09951–07150)
(b)
Using SST, press out the bearing from the rack housing.
SST
09950–60010 (09951–00260),
09950–70010 (09951–07150)
![](/vehicles/linovind/vere/fry/rdicl.png)
F08337
Bearing
SST
F08338
Bearing
SST
F01798
Bushing
SST
SST
Oil Seal
F01799
Press
Oil Seal
SST
SST
R10955
–
STEERING
POWER STEERING GEAR
SR–47
3274
(c)
Coat a new bearing with molybdenum disulfide lithium
base grease.
(d)
Using SST, press in the bearing.
SST
09950–60010 (09951–00310),
09950–70010 (09951–07150)
(e)
Coat a new bearing with molybdenum disulfide lithium
base grease.
(f)
Using SST, press in the bearing.
SST
09950–60010 (09951–00320),
09950–70010 (09951–07150)
3.
IF NECESSARY, REPLACE OIL SEAL
(a)
Using SST, remove the oil seal from the bushing.
SST
09527–20011, 09612–24014 (09613–22011)
NOTICE:
Be careful not to damage the bushing.
(b)
Coat a new oil seal lip with power steering fluid.
(c)
Using SST, press in the oil seal.
SST
09950–60010 (09951–00300, 09951–00460,
09952–06010)
NOTICE:
Make sure to install the oil seal in the correct direction.
4.
IF NECESSARY, REPLACE TEFLON RING AND O–
RING
(a)
Using a screwdriver, remove the teflon ring and O–ring
from the steering rack.
NOTICE:
Be careful not to damage the groove for the teflon ring.
(b)
Coat a new O–ring with power steering fluid and install it
on steering rack.
![](/vehicles/linovind/vere/fry/foovi.png)
R06172
N00401
R11572
Teflon Ring
R11573
Teflon Ring
SST
SR–48
–
STEERING
POWER STEERING GEAR
3275
(c)
Expand a new teflon ring with your fingers.
NOTICE:
Be careful not to over–expand the teflon ring.
(d)
Coat the teflon ring with power steering fluid.
(e)
Install the teflon ring on the steering rack, and settle it
down with your fingers.
5.
IF NECESSARY, REPLACE TEFLON RINGS
(a)
Using a screwdriver, remove the 4 teflon rings from the
control valve assembly.
NOTICE:
Be careful not to damage the grooves for the teflon ring.
(b)
Expand 4 new teflon rings with your fingers.
NOTICE:
Be careful not to expand the teflon ring excessively.
(c)
Coat the teflon rings with power steering fluid.
(d)
Install the teflon rings on the control valve assembly, and
settle them down with your fingers.
(e)
Carefully slide the tapered end of SST over the teflon
rings until they fit to the control valve assembly.
SST
09631–20081
NOTICE:
Be careful not to damage the teflon rings.
![](/vehicles/linovind/vere/fry/ril.png)
SR02R–09
F08341
SST
Oil Seal
SST
W02101
SST
Rack Teeth End
R11574
Vinyl Tape
–
STEERING
POWER STEERING GEAR
SR–49
3276
REASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1.
COAT PARTS INDICATED BY ARROWS WITH POWER
STEERING FLUID OR MOLYBDENUM DISULFIDE
LITHIUM BASE GREASE (See pages
2.
INSTALL OIL SEAL
(a)
Coat a new oil seal lip with power steering fluid.
(b)
Using SST, press in the oil seal.
SST
09950–60010 (09951–00330, 09951–00490,
09952–06010), 09950–70010 (09951–07360)
NOTICE:
Make sure to install the oil seal in the correct direc-
tion.
Take care that the oil seal does not get reversed as
you install it.
3.
INSTALL STEERING RACK
(a)
Install SST to the rack.
SST
09631–20051
HINT:
If necessary, scrape the burrs off the rack teeth end and bur-
nish.
(b)
Coat the SST with power steering fluid.
(c)
Install the steering rack into the rack housing.
NOTICE:
Be careful not to damage the oil seal lip.
(d)
Remove the SST.
SST
09631–20051
4.
INSTALL BUSHING
(a)
Coat a new O–ring with power steering fluid and install it
on the bushing.
(b)
To prevent oil seal lip damage, wind vinyl tape on the
steering rack end, and apply power steering fluid.
(c)
Install the bushing.
NOTICE:
Make sure to install the bushing in the correct direc-
tion.
Be careful not to damage the oil seal lip.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст