Toyota Sequoia (2005). Manual — part 874
I18696
UNLOCK
LOCK
I18690
2
1
UNLOCK LOCK
3
–
BODY ELECTRICAL
POWER DOOR LOCK CONTROL SYSTEM
BE–81
3485
11.
INSPECT BACK DOOR UNLOCK DETECTION
SWITCH CONTINUITY
Switch position
Tester connection
Specified condition
OFF (Door Lock set to
LOCK)
–
No continuity
ON (Door Lock set to
UNLOCK)
1 – 2
Continuity
If continuity is not as specified, replace the back door lock mo-
tor.
12.
INSPECT BACK DOOR KEY LOCK AND UNLOCK
SWITCH CONTINUITY (Back Door Control switch)
Switch position
Tester connection
Specified condition
LOCK
1 – 3
Continuity
OFF
–
No continuity
UNLOCK
2 – 3
Continuity
If continuity is not as specified, replace the switch.
BE2ML–01
BE–82
–
BODY ELECTRICAL
THEFT DETERRENT SYSTEM
3486
THEFT DETERRENT SYSTEM
ON–VEHICLE INSPECTION
1.
OUTLINE OF THEFT DETERRENT SYSTEM
When the theft deterrent system detects any theft, it informs
people around by flashing lights and sound.
All initial settings are performed in active mode. It can be
switched to passive mode by using the hand–held tester. (See
step 3. CHANGING METHOD OF PASSIVE MODE.)
HINT:
There are 4 conditions in this system: disarmed state, arming
preparation, armed state and alarm sounding.
(1)
Disarmed state
Alarm function does not operate.
Theft deterrent function is not performed.
(2)
Arming preparation
Time until transferring to armed state.
Theft deterrent function is not performed.
(3)
Armed state
Theft deterrent function is ready.
(4)
Alarm sounding:
When the system detects a theft, it informs people
around the vehicle using light and sound.
Refer to the table below for alarming method or
time.
Horn
Security horn
Alarm method
Headlight
Alarm method
Taillight
Interior light
Alarm time
60 seconds
Alarm output
Continuous 0.4 secs. (ON)
0.4 secs. (OFF)
HINT:
Alarm output for the hazard is the same as the one for the haz-
ard on the vehicle.
If any of the doors is unlocked not by the key or wireless remote
control in the armed state, a force lock signal will be output.
Disarmed state
Perform any of the following and the system will go on to ”Arming preparation”:
With all the doors, the engine hood and the back door closed, lock all doors with the key.
With all the doors, the engine hood and the back door closed, lock all doors by the
wireless remote control.
With all the doors, engine hood and back door locked, open and close any of the doors, the
engine hood or the back door, then close and lock all doors, the engine hood and the back door.
Arming preparation
Perform the following and the system will
go on to ”Armed state”:
Let 30 seconds elapse with all the doors,
engine hood and the back door closed and
locked.
Perform any of the following and the system
will return to ”Disarmed state”:
Open any of the doors, the engine hood or
the back door .
Unlock any of the doors or the back door.
Put the key in the key cylinder.
Reconnect the battery.
Armed state
Perform any of the following and the system
will return to ”Disarmed state”:
Unlock any of the doors or the back door by
the wireless remote control.
Unlock any of the doors or the back door with
the key.
Put the key in the key cylinder and turn it ON.
Perform any of the following and the system
will go on to ”Alarm sounding”:
Open any of the doors or the back door.
Unlock any of the doors or the back door in
any way other than with a key or by the wireless
remote control.
Open the engine hood.
Reconnect the battery.
When input from the optional glass break sensor
is detected (Dealer option).
(Key not inserted in key cylinder.)
Alarm sounding
The vehicle’s horn and security horn will sound,
and the hazard, interior, tail and head lights come
on for 60 seconds.
After the alarm has stopped, the system will
return to ”Armed state”.
Perform any of the following and the system
will return to ”Disarmed state”:
Unlock any of the doors and the back door by
the wireless remote control.
Unlock any of the doors or the back door with
the key.
Put the key in the key cylinder and turn it ON.
–
BODY ELECTRICAL
THEFT DETERRENT SYSTEM
BE–83
3487
2.
ACTIVE ARMING MODE
BE–84
–
BODY ELECTRICAL
THEFT DETERRENT SYSTEM
3488
Indicator light output:
Condition
Indicator light
Disarmed state
OFF
Arming preparation
ON
Armed state
OFF
Alarm sounding
ON
HINT:
Even in the disarmed state, the indicator light blinks. (Due to the
signal output from the immobilizer system.) The indicator al-
ways blinks receiving the signal from the immobilizer system
any time in the armed state.
Blinking frequency:
0.2 seconds (ON)
1.8 seconds (OFF)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст