Jaguar XJ (X350). Service manual — part 551
Exhaust Manifold LH (30.15.55)
Removal
1 . Remove the left-hand exhaust gas recirculation (EGR) valve.
For additional information, refer to Exhaust Gas Recirculation (EGR) Valve LH
2 . Remove the left-hand turbocharger.
For additional information, refer to Turbocharger LH
3 . Remove the exhaust manifold heatshield.
4 . Lower the vehicle.
5 . NOTE:
New exhaust manifold retaining studs must be fitted if the old studs are removed.
Remove and discard the exhaust manifold retaining nuts.
6 . Raise the vehicle.
7 . Remove the exhaust manifold.
8 . Remove and discard the exhaust manifold gasket.
Installation
1 . Install a new exhaust manifold gasket.
2
.
CAUTION: Make sure that the exhaust manifold and gasket are correctly aligned to
the cylinder head and the exhaust manifold retaining studs.
www.
Install the exhaust manifold.
3 . Lower the vehicle.
4 . Install new exhaust manifold retaining nuts.
Tighten to 23 Nm.
5 . Raise the vehicle.
6 . Install the exhaust manifold heatshield.
Tighten to 10 Nm.
7 . Install the left-hand turbocharger.
For additional information, refer to Turbocharger LH
8 . Install the left-hand EGR valve.
For additional information, refer to Exhaust Gas Recirculation (EGR) Valve LH
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст