Jaguar XJ (X350). Service manual — part 550
![](/vehicle/yohir/vahe/souieto/rysli.png)
6 . NOTE:
Make sure that the engine mount electrical connector is fully seated.
Connect the engine mount electrical connector.
Attach the engine mount wiring harness.
7 . Reposition the starter motor positive cable.
8 . Attach the starter motor positive cable.
Tighten to 10 Nm.
![](/vehicle/yohir/vahe/souieto/htiosh.png)
9 . Attach the lower steering column.
Install the steering gear shaft pinch bolt.
Tighten to 35 Nm.
10 . Connect the power steering control valve actuator electrical connector.
11 . Attach the air cleaner outlet tube.
1) Attach the air cleaner outlet tube to turbocharger retaining clip.
2) Attach the air cleaner outlet tube to breather tube retaining clip.
www.
![](/vehicle/yohir/vahe/souieto/xyou.png)
12 . Attach the air cleaner upper outlet tube to the timing cover.
13 . Install the turbocharger outlet pipe.
14 . Tighten the turbocharger outlet pipe retaining clips.
![](/vehicle/yohir/vahe/souieto/tod.png)
15 . Install the generator cooling duct.
16 . Install the air deflector.
For additional information, refer to Air Deflector (76.11.41)
17 . Attach the upper MAF sensor outlet pipe.
18 . Attach the EGR cooler coolant pipe.
19 . Connect the battery ground cable.
For additional information, refer to Battery Connect (86.15.15)
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст