Nissan Qashqai (2007-2010). Manual — part 623
![](/vehicle/qul/ene/roryboritele/fumyor.png)
ADAPTER CASE
DLN-65
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
1.
Remove adapter case mounting bolts (
).
2.
Lightly tap adapter case with a plastic hammer to remove
adapter case.
3.
Remove O-ring from adapter case.
4.
Remove adapter case oil seal with a screwdriver.
CAUTION:
Be careful not to damage adapter case.
CVT : Assembly
INFOID:0000000001056009
1.
Install O-ring to adapter case.
CAUTION:
• Never reuse O-ring.
• Apply multi-purpose grease to O-ring.
2.
Install adapter case to the transfer case.
3.
Apply anti-corrosive oil onto threads and seats of bolts (
), and
tighten with the specified torque.
4.
Check backlash, tooth contact, total preload and companion
flange runout. Refer to
CAUTION:
Measure the total preload without the adapter case oil seal.
SDIA3076J
SDIA3077J
SDIA3078J
SDIA3076J
![](/vehicle/qul/ene/roryboritele/ging.png)
DLN-66
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
ADAPTER CASE
5.
Install adapter case oil seal (1) to the adapter case with drifts.
CAUTION:
• Never reuse adapter case oil seal.
• Apply multi-purpose grease onto oil seal lips, and gear oil
onto the circumference.
CVT : Inspection After Disassembly
INFOID:0000000001056010
Check items below. If necessary, replace them with new ones.
CASE
Check the bearing mounting surface for wear, cracks and damages.
A
: Drift (SST: ST30720000)
B
: Drift (SST: ST27861000)
C
: Drift (SST: KV40104830)
Dimension “D”
: 0.5 – 1.5 mm
JSDIA0226ZZ
![](/vehicle/qul/ene/roryboritele/meou.png)
RING GEAR SHAFT
DLN-67
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
RING GEAR SHAFT
M/T
M/T : Exploded View
INFOID:0000000001060134
1.
Adapter case oil seal (outer)
2.
O-ring (outer)
3.
Adapter case oil seal (inner)
4.
Adapter case
5.
O-ring (inner)
6.
Ring gear shaft
7.
Ring gear adjusting shim
(adapter case side)
8.
Ring gear shaft bearing
(adapter case side)
9.
Ring gear
10. Ring gear nut
11.
Ring gear shaft bearing
(transfer case side)
12. Ring gear adjusting shim
(transfer case side)
13. Transfer case
14. Air breather hose
15. Air breather tube
16. Gasket
17. Filler plug
18. Drain plug
19. Plug
20. Drive pinion
21. Drive pinion adjusting shim
22. Drive pinion bearing (front side)
23. Collapsible spacer
24. Drive pinion bearing (rear side)
25. Drive pinion oil seal
26. Companion flange
27. Lock nut
A: Oil seal lip
: Apply gear oil.
: Apply anti-corrosive oil.
JSDIA0212GB
![](/vehicle/qul/ene/roryboritele/cru.png)
DLN-68
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
RING GEAR SHAFT
M/T : Disassembly
INFOID:0000000000972142
1.
Remove adapter case. Refer to
2.
Remove adapter case oil seal (outer/inner) from the adapter case. Refer to
.
3.
Tap the ring gear adjusting shim from the cutout on the adapter
case with a brass rod to remove ring gear shaft bearing outer
race (adapter case side) and ring gear adjusting shim (adapter
case side).
CAUTION:
Be careful not to damage adapter case.
4.
Remove ring gear shaft assembly from the transfer case.
5.
Remove outer race of ring gear shaft bearing (transfer case
side) and ring gear adjusting shim (transfer case side) from the
transfer case.
6.
Remove inner race of ring gear shaft bearing (transfer case
side) from ring gear shaft with drift (A) (commercial service tool)
and replacer (B) (SST: ST22730000).
7.
Remove ring gear nut (1).
CAUTION:
Never damage ring gear shaft.
8.
Remove ring gear from ring gear shaft with a drift (A) (SST:
ST33052000).
: Apply Genuine Liquid Gasket, Three Bond TB1215 or equivalent.
Refer to
for symbols not described on the above.
SDIA3079J
SDIA3080J
SDIA3081J
SDIA3082J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст