Subaru Impreza 3 / Impreza WRX / Impreza WRX STI. Service manual — part 534
VDC(diag)-35
Warning Light Illumination Pattern
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
G: HILL START ASSIST WARNING LIGHT DOES NOT GO OFF
DETECTING CONDITION:
• Defective combination meter
• Defective CAN communication
TROUBLE SYMPTOM:
When starting the engine, the hill start assist warning light is kept ON.
Step
Check
Yes
No
1
CHECK TRANSMISSION TYPE.
Is the transmission type 6MT? Go to step
2
RELEASE HILL ASSIST OFF MODE.
Perform the procedure for releasing hill assist
OFF mode. <Ref. to BR-51, OPERATION, Hill
Start Assist.>
Does the hill start assist warn-
ing light go off?
VDC is normal.
3
READ DTC.
Read the DTC. <Ref. to VDC(diag)-25, Read
Diagnostic Trouble Code (DTC).>
Is DTC displayed?
4
CHECK LAN SYSTEM.
Perform the diagnosis for LAN system. <Ref. to
LAN(diag)-2, Basic Diagnostic Procedure.>
Is there any fault in LAN sys-
tem?
5
CHECK COMBINATION METER.
Check the combination meter. <Ref. to IDI-5,
INSPECTION, Combination Meter System.>
Is combination meter OK?
Replace the com-
bination meter.
<Ref. to IDI-16,
Combination
Meter.>
VDC(diag)-36
Warning Light Illumination Pattern
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
H: VDC OFF & VDC TRACTION MODE INDICATOR LIGHT DO NOT GO OFF
NOTE:
This diagnosis is applied to 6MT model.
DETECTING CONDITION:
• Defective combination meter
• Defective CAN communication
• VDC OFF switch is shorted.
TROUBLE SYMPTOM:
When starting the engine, VDC OFF indicator light is kept ON.
NOTE:
When pressing the VDC OFF switch for 10 seconds or more, the VDC OFF indicator light goes off and cannot
operate any more. When turning the ignition switch from OFF to ON, the OFF operation enabled status is re-
stored.
Step
Check
Yes
No
1
READ DTC.
Read the DTC. <Ref. to VDC(diag)-25, Read
Diagnostic Trouble Code (DTC).>
Is DTC displayed?
2
CHECK VDC OFF SWITCH.
Remove and check VDC OFF switch. <Ref. to
VDC-29, VDC OFF Switch.>
Is the VDC OFF switch normal? Go to step
Replace the VDC
OFF switch. <Ref.
to VDC-29, VDC
OFF Switch.>
3
CHECK LAN SYSTEM.
Perform the diagnosis for LAN system. <Ref. to
LAN(diag)-2, Basic Diagnostic Procedure.>
Is there any fault in LAN sys-
tem?
4
CHECK COMBINATION METER.
Check the combination meter. <Ref. to IDI-5,
INSPECTION, Combination Meter System.>
Is combination meter OK?
Replace the com-
bination meter.
<Ref. to IDI-16,
Combination
Meter.>
VDC(diag)-37
Warning Light Illumination Pattern
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
I: VDC OFF INDICATOR LIGHT DOES NOT GO OFF
NOTE:
This diagnosis is applied to 5MT model.
DETECTING CONDITION:
• Defective combination meter
• Defective CAN communication
• VDC OFF switch is shorted.
TROUBLE SYMPTOM:
When starting the engine, VDC OFF indicator light is kept ON.
NOTE:
When pressing the VDC OFF switch for 10 seconds or more, the VDC OFF indicator light goes off and cannot
operate any more. When turning the ignition switch from OFF to ON, the OFF operation enabled status is re-
stored.
Step
Check
Yes
No
1
READ DTC.
Read the DTC. <Ref. to VDC(diag)-25, Read
Diagnostic Trouble Code (DTC).>
Is DTC displayed?
2
CHECK VDC OFF SWITCH.
Remove and check VDC OFF switch. <Ref. to
VDC-29, VDC OFF Switch.>
Is the VDC OFF switch normal? Go to step
Replace the VDC
OFF switch. <Ref.
to VDC-29, VDC
OFF Switch.>
3
CHECK LAN SYSTEM.
Perform the diagnosis for LAN system. <Ref. to
LAN(diag)-2, Basic Diagnostic Procedure.>
Is there any fault in LAN sys-
tem?
4
CHECK COMBINATION METER.
Check the combination meter. <Ref. to IDI-5,
INSPECTION, Combination Meter System.>
Is combination meter OK?
Replace the com-
bination meter.
<Ref. to IDI-16,
Combination
Meter.>
VDC(diag)-38
Warning Light Illumination Pattern
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
J: VDC WARNING LIGHT AND VDC INDICATOR LIGHT DO NOT GO OFF
DETECTING CONDITION:
• Defective combination meter
• Defective CAN communication
• Defective engine
TROUBLE SYMPTOM:
When starting the engine, the VDC warning light & VDC indicator light remains lit.
Step
Check
Yes
No
1
READ DTC.
Read the DTC. <Ref. to VDC(diag)-25, Read
Diagnostic Trouble Code (DTC).>
Is DTC displayed?
2
CHECK ENGINE.
Does the malfunction indicator
light illuminate?
Repair the engine. Go to step
3
CHECK ENGINE COOLANT TEMPERA-
TURE.
Warm up the engine, and check if the VDC
warning light & VDC indicator light illumination
condition changes.
When the engine coolant tem-
perature is too low, the VDC
warning light & VDC indicator
light illuminates. Do the lights
go off when the engine is
warmed up?
Current condition
is normal.
4
CHECK LAN SYSTEM.
Perform the diagnosis for LAN system. <Ref. to
LAN(diag)-2, Basic Diagnostic Procedure.>
Is there any fault in LAN sys-
tem?
5
CHECK COMBINATION METER.
Check the combination meter. <Ref. to IDI-5,
INSPECTION, Combination Meter System.>
Is combination meter OK?
Replace the com-
bination meter.
<Ref. to IDI-16,
Combination
Meter.>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст