Subaru Impreza 3 / Impreza WRX / Impreza WRX STI. Service manual — part 532
VDC(diag)-27
Clear Memory Mode
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
9. Clear Memory Mode
A: OPERATION
1) On «Main Menu» display, select {Each System
Check}.
2) On «System Selection Menu» display, select
{Brake Control System}.
3) When {VDC} is displayed, select the [OK] button.
4) On «Brake Control Diagnosis» display, select
{Clear Memory}.
5) When «Clear Memory ?» is shown on the
screen, click the “YES” button.
6) When «Done» and «Turn Ignition Switch OFF»
are shown on the screen, turn the ignition switch to
OFF.
NOTE:
For detailed operation procedures, refer to “PC ap-
plication help for Subaru Select Monitor”.
VDC(diag)-28
Warning Light Illumination Pattern
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
10.Warning Light Illumination Pattern
A: INSPECTION
NOTE:
• The illumination pattern above shows proper condition.
• While hill start assist is OFF, hill start assist warning light (15) always illuminates to indicate that hill start
assist does not operate. (6MT model only)
1) When warning lights or indicator lights do not illuminate in accordance with this illumination pattern, there
must be an electrical malfunction.
communication circuit. <Ref. to VDC(diag)-31, VDC WARNING LIGHT & VDC INDICATOR LIGHT, VDC
OFF & VDC TRACTION MODE INDICATOR LIGHT DO NOT COME ON, Warning Light Illumination Pat-
tern.> <Ref. to VDC(diag)-32, VDC WARNING LIGHT & VDC INDICATOR LIGHT, VDC OFF INDICATOR
LIGHT DO NOT COME ON, Warning Light Illumination Pattern.> <Ref. to VDC(diag)-33, ABS WARNING
LIGHT DOES NOT COME ON, Warning Light Illumination Pattern.> <Ref. to VDC(diag)-33, HILL START
ASSIST WARNING LIGHT DOES NOT COME ON, Warning Light Illumination Pattern.>
(1)
Ignition switch
(6)
Light OFF
(11) Several seconds (depending on
engine coolant temperature)
(2)
OFF
(7)
Light ON
(12) Brake warning light (EBD warning
light)
(3)
ON
(8)
2 seconds
(13) Parking brake
(4)
Engine start
(9)
VDC OFF & VDC traction mode
indicator light (6MT model)
VDC OFF indicator light (5MT
model)
(14) Released
(5)
ABS warning light
(10) VDC warning light & VDC indica-
tor light
(15) Hill start assist warning light
VDC00606
(2)
(6)
(6)
(7)
(6)
(6)
(7)
(8)
(6)
(6)
(7)
(11)
(3)
(3)
(4)
(1)
(5),(15)
(9)
(10)
(6)
(7)
(12)
(14)
(13)
VDC(diag)-29
Warning Light Illumination Pattern
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
cuit. <Ref. to VDC(diag)-34, ABS WARNING LIGHT DOES NOT GO OFF, Warning Light Illumination Pat-
combination meter circuit, or CAN communication circuit. <Ref. to VDC(diag)-35, HILL START ASSIST
WARNING LIGHT DOES NOT GO OFF, Warning Light Illumination Pattern.>
communication circuit. <Ref. to VDC(diag)-36, VDC OFF & VDC TRACTION MODE INDICATOR LIGHT DO
NOT GO OFF, Warning Light Illumination Pattern.> <Ref. to VDC(diag)-37, VDC OFF INDICATOR LIGHT
DOES NOT GO OFF, Warning Light Illumination Pattern.> <Ref. to VDC(diag)-38, VDC WARNING LIGHT
AND VDC INDICATOR LIGHT DO NOT GO OFF, Warning Light Illumination Pattern.>
NOTE:
• Even though the ABS warning light does not go off after 2 seconds from ABS warning light illumination, the
ABS system operates normally when the warning light goes off while driving at approximately 12 km/h (7
MPH). However, the ABS system does not work while the ABS warning light is illuminated.
• It may take several minutes before the VDC warning light & VDC indicator light goes off, if the vehicle is
parked under low temperature for a specified time. This is not defective because it is resulted from low engine
coolant temperature.
ABS warning light, and VDC warning light & VDC indicator light may illuminate because VDCCM&H/U de-
the Clear Memory Mode. <Ref. to VDC(diag)-27, Clear Memory Mode.>
6) Warning light illumination pattern at VDC mode change (6MT model only)
nation meter circuit. <Ref. to VDC(diag)-42, VDC TRACTION MODE, VDC MODE DOES NOT CHANGE,
Warning Light Illumination Pattern.>
(1)
VDC OFF switch
(6)
VDC OFF & VDC traction mode
indicator light
(10) VDC mode
(2)
OFF
(7)
Light OFF
(11) Normal mode
(3)
ON
(8)
Green light
(12) Traction mode
(4)
2 seconds or less
(9)
Yellow illumination
(13) OFF mode
(5)
2 seconds or more, 10 seconds or
less
(1)
(2)
(3)
(3)
(3)
(4)
(5)
(4)
(2)
(2)
(2)
(6)
(7)
(11)
(12)
(13)
(11)
(7)
(8)
(9)
(10)
VDC00595
VDC(diag)-30
Warning Light Illumination Pattern
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
7) Warning light illumination pattern at hill start assist OFF mode change (6MT model only)
START ASSIST ON/OFF MODE, VDC MODE DOES NOT CHANGE, Warning Light Illumination Pattern.>
NOTE:
• Hill start assist warning light always illuminates to inform that the hill start assist does not operate during
hill start assist OFF mode.
(1)
Ignition key
(6)
2 seconds or less
(10) 5 seconds or less
(2)
OFF
(7)
VDC OFF & VDC traction mode
indicator light
(11) Hill start assist warning light
(3)
Start
(8)
Approx. 8 seconds (until (7) goes
off)
(12) Yellow illumination
(4)
ON
(9)
Illumination changes from in green
to in yellow.
(13) Hill start assist function
(5)
VDC OFF switch
VDC00689
(1)
(2)
(2)
(2)
(2)
(2)
(2)
(4)
(4)
(4)
(12)
(12)
(2)
(2)
(2)
(4)
(9)
(10)
(8)
(3)
(3)
(4)
(6)
(4)
(4)
(5)
(7)
(11)
(13)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст