Subaru Impreza 3 / Impreza WRX / Impreza WRX STI. Service manual — part 721
SL-33
Rear Inner Remote
SECURITY AND LOCKS
8. Rear Inner Remote
A: REMOVAL
Refer to “Front Inner Remote” for the removal pro-
cedure. <Ref. to SL-30, REMOVAL, Front Inner
B: INSTALLATION
Install each part in the reverse order of removal.
C: INSPECTION
Check if the rear remote handle operates normally.
• If the lever is faulty, replace the rear inner remote
handle.
• If the cable is deformed, replace the rear door
latch and door lock actuator assembly.
SL-34
Rear Outer Handle
SECURITY AND LOCKS
9. Rear Outer Handle
A: REMOVAL
1) Raise the rear door glass to the top position.
2) Remove the rear door trim. <Ref. to EI-45, RE-
3) Remove the sealing cover. <Ref. to EB-24, RE-
4) Remove the screws, and move aside the rear
door latch and door lock actuator assembly.
5) Remove the child protector cover, and loosen
the TORX
®
bolt.
6) Remove the outer handle cover.
7) Move the rear outer handle towards the rear,
and remove the rear outer handle.
CAUTION:
Do not apply excessive force to remove the
handle from the door panel. The door panel
may become deformed.
8) Remove the outer spacer, and remove the frame
assembly from the inner side.
9) Remove the TORX
®
bolt.
10) Remove the frame assembly from inside the
door panel.
B: INSTALLATION
Install each part in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. <Ref. to SL-2, DOOR LOCK ASSEM-
BLY, COMPONENT, General Description.>
C: INSPECTION
Check if the rear outer handle operates normally.
• If the lever is faulty, replace the rear outer han-
dle.
• If the rod is deformed, replace the rear door latch
and door lock actuator assembly.
SL-00738
SL-00739
SL-00737
SL-35
Rear Door Latch and Door Lock Actuator Assembly
SECURITY AND LOCKS
10.Rear Door Latch and Door
Lock Actuator Assembly
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the rear door trim. <Ref. to EI-45, RE-
3) Remove the wire from the rear inner remote.
<Ref. to SL-33, REMOVAL, Rear Inner Remote.>
4) Remove the sealing cover. <Ref. to EB-24, RE-
5) Remove the rear door glass. <Ref. to GW-21,
6) Disconnect the door lock actuator connector.
7) Remove the screws, and remove the rear door
latch and door lock actuator assembly.
B: INSTALLATION
Install each part in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. <Ref. to SL-2, DOOR LOCK ASSEM-
BLY, COMPONENT, General Description.>
NOTE:
Make sure the child safety lock works correctly af-
ter installation.
C: INSPECTION
1. DOOR LATCH
Check if the rear door latch operates normally.
• If the cable or rod is faulty, replace the rear door
latch and door lock actuator assembly.
2. LOCK ACTUATOR
1) Disconnect the ground cable from battery.
2) Disconnect the door lock actuator harness con-
nector.
3) Connect the battery to door lock actuator termi-
nals.
4) If the actuator does not operate normally, re-
place the rear door latch & door lock actuator as-
sembly.
SL-00738
Actuator operation
Terminals
No. 1
No. 2
Lock → Unlock
–
+
Unlock → Lock
+
–
2 1
SL-00765
SL-36
Rear Gate Opener Button
SECURITY AND LOCKS
11.Rear Gate Opener Button
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the rear gate trim. <Ref. to EI-69, RE-
3) Remove the rear gate garnish. <Ref. to EI-72,
4) Disconnect the harness connector of the rear
gate opener button.
5) Hold down the rear gate opener button hook,
and remove the rear gate opener button.
B: INSTALLATION
CAUTION:
Make sure that the harness grommet is secure-
ly installed.
If not properly installed, this may cause leaks.
Install each part in the reverse order of removal.
C: INSPECTION
1) Disconnect the rear gate opener button harness
connector.
2) Check the resistance between rear gate opener
button connector terminals.
3) Replace the rear gate opener button if the in-
spection result is not within the standard value.
Switch
Terminal No.
Standard
Open
1 and 2
Less than 1 Ω
Close
1 MΩ or more
SL-00742
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст