Subaru Legacy (2005 year). Service manual — part 945
ET-13
ENTERTAINMENT
Antenna Amplifier
12.Antenna Amplifier
A: REMOVAL
1. SEDAN MODEL
1) Disconnect the ground cable from battery.
2) Remove the rear quarter trim. <Ref. to EI-63,
SEDAN MODEL (MODEL WITH CURTAIN AIR-
BAG), REMOVAL, Rear Quarter Trim.>
3) Disconnect the harness connectors and termi-
nals.
4) Remove the curtain airbag module. <Ref. to AB-
20, REMOVAL, Curtain Airbag Module.>
5) Remove the screw and detach antenna amplifi-
er.
2. WAGON MODEL
1) Disconnect the ground cable from battery.
2) Remove the rear gate trim. <Ref. to EI-69, RE-
MOVAL, Rear Gate Trim.>
3) Disconnect the harness connectors and termi-
nals.
4) Remove the screw and remove antenna amplifi-
er.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the resistance of antenna amplifier.
• Sedan model
• Wagon model
ET-00088
ET-00089
Terminal No.
Standard
(1)-a and Amplifier body
More than 10 k
Ω
(1)-b and Amplifier body
More than 10 k
Ω
(2)-a and Amplifier body
More than 10 k
Ω
(3)-a and Amplifier body
More than 10 k
Ω
ET-00090
(3)
(2)
(2)-b
(1)-a
(1)-b
(3)-a
(1)-a
(1)-b
ET-00091
(3)-a
(2)-b
(1)-a
(1)-b
(1)
(2),(3)
ET-14
ENTERTAINMENT
Noise Suppressor
13.Noise Suppressor
A: REMOVAL
1. SEDAN MODEL
1) Disconnect the ground cable from battery.
2) Remove the rear quarter trim. <Ref. to EI-63,
SEDAN MODEL (MODEL WITH CURTAIN AIR-
BAG), REMOVAL, Rear Quarter Trim.>
3) Remove the curtain airbag module. <Ref. to AB-
20, REMOVAL, Curtain Airbag Module.>
4) Disconnect the harness connector from noise
suppressor.
5) Remove the harness clip.
6) Remove the screws and remove noise suppres-
sor.
2. WAGON MODEL
1) Disconnect the ground cable from battery.
2) Remove the rear gate trim. <Ref. to EI-69, RE-
MOVAL, Rear Gate Trim.>
3) Disconnect the harness connector from noise
suppressor.
4) Remove the screws and remove noise suppres-
sor.
B: INSTALLATION
Install in the reverse order of removal.
ET-00092
ET-00093
ET-15
ENTERTAINMENT
Navigation Display
14.Navigation Display
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the clips, and then remove the center
upper panel.
3) Remove the display mounting screws.
4) Disconnect the harness connector, and then re-
move the navigation display.
B: INSTALLATION
Install in the reverse order of removal.
ET-00097
ET-00098
ET-16
ENTERTAINMENT
GPS Antenna
15.GPS Antenna
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the combination meter. <Ref. to IDI-15,
REMOVAL, Combination Meter.>
3) Remove the GPS antenna mounting screw, and
then remove the GPS antenna.
4) Remove the audio. <Ref. to ET-5, REMOVAL,
Audio.>
5) Remove the GPS antenna cord connector from
steering support beam stay (on the driver’s side).
B: INSTALLATION
Install in the reverse order of removal.
ET-00099
ET-00100
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст