Subaru Legacy (2005 year). Service manual — part 94
SPEED CONTROL SYSTEMS
SP(H4SO 2.0)
Page
General Description . . . . . . . . . . . . . . . . . . . . . 2
Accelerator Pedal. . . . . . . . . . . . . . . . . . . . . . 4
SP(H4SO 2.0)-2
Vehicle-id:
SIE-id:S107001a22:
∼
SPEED CONTROL SYSTEMS
General Description
1. General Description
A: SPECIFICATION
B: COMPONENT
• LHD model
Accelerator pedal
Stroke
At pedal pad
LHD model
50 — 63 mm (1.97 — 2.48 in)
RHD model
53 — 65 mm (2.09 — 2.56 in)
(1)
Accelerator pedal ASSY
(3)
Clip
Tightening torque: N
⋅
m (kgf-m, ft-lb)
(2)
Accelerator plate
(4)
Stopper
T: 18 (1.8, 13.0)
T
(3)
(1)
(2)
(4)
T
SP-02002
SP(H4SO 2.0)-3
SPEED CONTROL SYSTEMS
General Description
• RHD model
C: CAUTION
• Wear work clothing, including a cap, protective
goggles and protective shoes during operation.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust and dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Be careful not to burn yourself, because each
part on the vehicle is hot after running.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before disconnecting electrical connectors of
sensors or units, be sure to disconnect the ground
cable from battery.
(1)
Accelerator pedal ASSY
Tightening torque: N
⋅
m (kgf-m, ft-lb)
(2)
Stopper
T: 18 (1.8, 13.0)
SP-02003
T
T
(2)
(1)
SP(H4SO 2.0)-4
Vehicle-id:
SIE-id:S107005a18:A:REMOVAL
∼
SPEED CONTROL SYSTEMS
Accelerator Pedal
2. Accelerator Pedal
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector.
3) Remove the nut securing accelerator pedal as-
sembly.
• LHD model
• RHD model
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
18 N
⋅
m (1.8 kgf-m, 13.0 ft-lb)
C: DISASSEMBLY
NOTE:
Accelerator pedal cannot be disassembled.
SP-02001
T
T
SP-00052
T
T
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст