Subaru Legacy (2005 year). Service manual — part 1023
CC(diag)-29
CRUISE CONTROL SYSTEM (DIAGNOSTICS)
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
E: DTC 16 IGNITION SWITCH
TROUBLE SYMPTOM:
Cruise control cannot be set.
WIRING DIAGRAM:
• 2.0 L turbo model, 3.0 L model, 2.5 L EC, K4 and EK model
CC-00364
B137
ECM
D14
D:
B137
9
30
29
28
31
20
19
18
22
21
10
12
11
14
24
27
26
17
16
1
2
3
4
5
6
7
13
23
15
25
8
D:
MAIN SBF
F/B No.12
SBF-6
IGNITION
SWITCH
BATTERY
CC(diag)-30
CRUISE CONTROL SYSTEM (DIAGNOSTICS)
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
• 2.0 L non-turbo model, 2.5 L KS, KA model
CC-00365
B135
ECM
B13
B:
MAIN SBF
F/B No.12
SBF-6
IGNITION
SWITCH
BATTERY
B135
5
6
7
8
2
1
9
4
3
10
24
22 23
25
11 12 13 14 15
26 27
28
16 17 18 19
20 21
29 30 31
32 33
34 35
B:
CC(diag)-31
CRUISE CONTROL SYSTEM (DIAGNOSTICS)
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
Check
Yes
No
1
CHECK IGNITION SWITCH CIRCUIT.
1) Turn the ignition switch to OFF.
2) Disconnect the ECM harness connector.
3) Turn the ignition switch to ON.
4) Measure the voltage between harness con-
nector terminal and chassis ground.
Connector & terminal
2.0 L turbo model, 3.0 L model, 2.5 L EC,
K4 and EK model:
(B137) No. 14 (+) — Chassis ground (
−
):
2.0 L non-turbo model, 2.5 L KS, KA mod-
el:
(B135) No. 13 (+) — Chassis ground (
−
):
Is the voltage more than 10 V? Check poor con-
tact in ECM con-
nector.
• Check fuse No.
12 (in fuse & relay
box).
• Check the har-
ness for open or
short circuit
between ignition
switch and ECM.
CC(diag)-32
CRUISE CONTROL SYSTEM (DIAGNOSTICS)
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
F: DTC 22 AND 32 VEHICLE SPEED SENSOR
DIAGNOSIS:
Disconnection or short circuit of vehicle speed sensor system.
TROUBLE SYMPTOM:
Cruise control cannot be set. (Cancelled immediately.)
Step
Check
Yes
No
1
CHECK ABS WARNING LIGHT.
1) Turn the ignition switch to ON.
2) After the combination meter initial operation
is completed, confirm that the ABS warning
light continues to illuminate.
Does the ABS warning light
continue to illuminate?
Check ABSCM or
VDCCM <Ref. to
ABS(diag)-2,
Basic Diagnostic
Procedure.> or
<Ref. to
VDC(diag)-2,
Basic Diagnostic
Procedure.>
2
CHECK LAN COMMUNICATION CIRCUIT
ERROR DISPLAY.
Check that the communication error is dis-
played on the odo/trip meter in combination
meter.
Is the error code “Er xx” dis-
played on odo/trip meter?
Check the LAN
communication cir-
cuit. <Ref. to
LAN(diag)-2, Basic
Diagnostic Proce-
dure.>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст