Subaru Legacy IV (2008 year). Service manual — part 868
DI-21
General Description
DIFFERENTIALS
399703600
PULLER ASSY
Used for removing companion flange.
899874100
INSTALLER
Used for installing the companion flange.
498077000
REMOVER
• Used for removing the differential side bearing
cone.
• For VA2-type
899864100
REMOVER
Used for removing the differential side bearing.
499277200
INSTALLER
• Used for installing the front bearing cone.
• For VA2-type
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-399703600
ST-899874100
ST-498077000
ST-899864100
ST-499277200
DI-22
General Description
DIFFERENTIALS
18758AA000
PULLER
• Used for removing side bearing cup.
• For VA2-type
18759AA000
PULLER ASSY
• Used for removing the differential side bearing
cone.
• For T-type
18678AA000
DUMMY SHAFT
• Used for adjusting pinion height and preload.
• For VA2-type
18831AA010
DIFFERENTIAL
CARRIER GAUGE
• Used for adjusting pinion height.
• For VA2-type
18630AA010
WRENCH COMPL
RETAINER
• Used for removing and installing the side oil
seal holder.
• For VA-type
• WRENCH ASSY (499787000) can also be
used.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST18758AA000
ST18759AA000
ST18678AA000
ST18831AA010
ST18630AA010
DI-23
General Description
DIFFERENTIALS
498175500
INSTALLER
• Used for installing the rear bearing cone.
• For VA1-type
498447100
INSTALLER
• Used for installing the oil seal.
• For VA1-type and T-type
399520105
SEAT
• Used for removing the side bearing cone.
• Used together with the PULLER SET
(899524100).
• For VA-type
498485400
DRIFT
• Used for installing side bearing cone.
• For VA1-type
498505501
DIFFERENTIAL
CARRIER GAUGE
• Used for adjusting pinion height.
• For VA1-type
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-498175500
ST-498447100
ST-399520105
ST-498485400
ST-498505501
DI-24
General Description
DIFFERENTIALS
498447110
DRIFT
• Used for press-fitting the bearing race (front)
of the differential carrier.
• For VA1-type
498447150
DUMMY SHAFT
• Used for adjusting pinion height and preload.
• For VA1-type
899524100
PULLER SET
Used for removing the differential side bearing
cone.
(1) Puller
(2) Cap
498515500
REPLACER
• Used for removing rear bearing cone.
• For VA1-type
499705404
SEAT
• Used for removing the side bearing race.
• Used together with PULLER ASSY
(499705401).
• For VA1-type
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-498447110
ST-498447150
ST-899524100
(1)
(2)
ST-498515500
ST-499705404
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст