Subaru Legacy IV (2008 year). Service manual — part 867
DI-17
General Description
DIFFERENTIALS
498427200
FLANGE WRENCH
Used for stopping rotation of companion flange
when removing and tightening self-lock nut.
398467700
DRIFT
• Used for removing pinion, pilot bearing and
front bearing cone.
• For T-type and VA1-type
399780104
WEIGHT
Used for installing the front bearing cone and the
pilot bearing companion flange.
899580100
INSTALLER
Used for press-fitting the front bearing cone and
pilot bearing.
899904100
STRAIGHT PIN
REMOVER
Used for driving out differential pinion shaft lock
pin.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-498427200
ST-398467700
ST-399780104
ST-899580100
ST-899904100
DI-18
General Description
DIFFERENTIALS
498247001
MAGNET BASE
• Used for measuring backlash between side
gear and pinion, and hypoid gear.
• Used together with DIAL GAUGE
(498247100).
498247100
DIAL GAUGE
• Used for measuring backlash between side
gear and pinion, and hypoid gear.
• Used together with the MAGNET BASE
(498247001).
398507704
BLOCK
• Used for adjusting pinion height and preload.
• For T-type and VA1-type
398177700
INSTALLER
• Used for installing the rear bearing cone.
• For T-type and VA2-type
398457700
ATTACHMENT
• Used for removing the side retainer.
• For T-type
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-498247001
ST-498247100
ST-398507704
ST-398177700
ST-398457700
DI-19
General Description
DIFFERENTIALS
398477703
DRIFT 2
• Used for press-fitting bearing race (rear) of dif-
ferential carrier.
• For T-type and VA2-type
398437700
DRIFT
• Used for installing the side oil seal.
• For T-type and VA2-type
398507702
DUMMY SHAFT
• Used for adjusting pinion height and preload.
• For T-type
398507703
DUMMY COLLAR
• Used for adjusting pinion height and preload.
• For T-type
398517700
REPLACER
• Used for removing rear bearing cone.
• For T-type and VA2-type
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-398477703
ST-398437700
ST-398507702
ST-398507703
ST-398517700
DI-20
General Description
DIFFERENTIALS
398487700
DRIFT
• Used for press-fitting side bearing cone.
• For T-type and VA2-type
398507701
DIFFERENTIAL
CARRIER GAUGE
• Used for adjusting pinion height.
• For T-type
398527700
PULLER ASSY
• Used for removing front oil seal.
• Used for removing side bearing cup. (T-type
and VA1-type)
28099PA090
OIL SEAL
PROTECTOR
• Used for installing the rear drive shaft to the
rear differential.
• For oil seal protection
28099PA100
DRIVE SHAFT
REMOVER
• Used for removing the rear drive shaft from
rear differential.
• For T-type
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-398487700
ST-398507701
ST-398527700
ST28099PA090
ST28099PA100
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст