Subaru Legacy IV (2008 year). Service manual — part 905
ABS(diag)-19
Inspection Mode
ABS (DIAGNOSTICS)
8. Inspection Mode
A: PROCEDURE
Reproduce the malfunction occurrence condition
as much as possible.
Drive the vehicle at a speed of 40 km/h (25 MPH) or
more for at least one minute.
ABS(diag)-20
Clear Memory Mode
ABS (DIAGNOSTICS)
9. Clear Memory Mode
A: OPERATION
1) On the «Main Menu» display, select {Each Sys-
tem Check}.
2) On the «System Selection Menu» display, select
the {Brake Control System}.
3) Click the [OK] button after the {ABS} is dis-
played.
4) On the «Brake Control Diagnosis» display, se-
lect the {Clearing Memory}.
5) When the “Clear Memory?” is shown on the
screen, click the [Yes] button.
6) When “Done” and “Turn Ignition Switch OFF” are
shown on the display screen, turn the ignition
switch to OFF.
NOTE:
For detailed operation procedures, refer to the “PC
application help for Subaru Select Monitor”.
ABS(diag)-21
ABS Warning Light / Brake Warning Light Illumination Pattern
ABS (DIAGNOSTICS)
10.ABS Warning Light / Brake Warning Light Illumination Pattern
A: INSPECTION
(1)
Ignition switch
(5)
ABS warning light
(9)
Brake warning light (EBD warning
light)
(2)
OFF
(6)
Light OFF
(3)
ON
(7)
Light ON
(10)
Parking brake
(4)
Engine start
(8)
1.5 sec.
(11)
Released
ABS00442
(2)
(1)
(3)
(3)
(4)
(6)
(5)
(6)
(7)
(8)
(9)
(10)
(6)
(6)
(11)
(7)
ABS(diag)-22
ABS Warning Light / Brake Warning Light Illumination Pattern
ABS (DIAGNOSTICS)
1) When the ABS warning light and brake warning
light do not illuminate in accordance with this illumi-
nation pattern, it can be thought that there is an
electrical problem.
2) When the ABS warning light remains constantly
OFF, check the combination meter circuit. <Ref. to
ABS(diag)-23, ABS WARNING LIGHT DOES NOT
COME ON, ABS Warning Light / Brake Warning
Light Illumination Pattern.>
3) When ABS warning light does not go off, check
the combination meter circuit. <Ref. to ABS(diag)-
25, ABS WARNING LIGHT DOES NOT GO OFF,
ABS Warning Light / Brake Warning Light Illumina-
tion Pattern.>
4) When the brake warning light does not go off,
check the brake warning circuit and the combina-
tion meter circuit. <Ref. to ABS(diag)-27, BRAKE
WARNING LIGHT DOES NOT GO OFF, ABS
Warning Light / Brake Warning Light Illumination
Pattern.>
NOTE:
Even though the ABS warning light does not go off
after approximately 1.5 seconds from ABS warning
light illumination, the ABS function operates nor-
mally when the warning light goes off while driving
at approximately 12 km/h (7 MPH). However, the
ABS system does not work while the ABS warning
light is illuminated.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст