Subaru Legacy IV (2008 year). Service manual — part 1066
ET-21
Navigation Body
ENTERTAINMENT
15.Navigation Body
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Slide the driver’s seat to the forward position.
3) Disconnect the connector.
4) Remove the bolts and then remove the naviga-
tion unit.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
8 N·m (0.82 kgf-m, 5.9 ft-lb)
ET-00185
ET-22
AUX Input Terminal
ENTERTAINMENT
16.AUX Input Terminal
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the console box. <Ref. to EI-54, RE-
MOVAL, Console Box.>
3) Disconnect the harness connector, and remove
the AUX input terminal from the console box.
B: INSTALLATION
Install in the reverse order of removal.
ET-23
Front Accessory Power Supply Socket
ENTERTAINMENT
17.Front Accessory Power
Supply Socket
A: WIRING DIAGRAM
<Ref. to WI-154, WIRING DIAGRAM, Front Acces-
sory Power Supply Socket System.>
B: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the console front panel. <Ref. to EI-55,
REMOVAL, Center Console.>
3) Disconnect the harness connector, and remove
the accessory power supply socket.
C: INSTALLATION
Install in the reverse order of removal.
ET-00094
ET-24
Rear Accessory Power Supply Socket
ENTERTAINMENT
18.Rear Accessory Power
Supply Socket
A: WIRING DIAGRAM
<Ref. to WI-155, WIRING DIAGRAM, Rear Acces-
sory Power Supply Socket System.>
B: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the console box. <Ref. to EI-54, RE-
MOVAL, Console Box.>
3) Disconnect the harness connector, and remove
the accessory power supply socket.
C: INSTALLATION
Install in the reverse order of removal.
ET-00095
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст