Subaru Legacy IV (2008 year). Service manual — part 1054
LI-33
Room Light
LIGHTING SYSTEM
29.Room Light
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the lens (A) and mounting screws (B).
3) Disconnect the harness connector and remove
the room light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
2. ROOM LIGHT SWITCH
Measure the resistance between room light switch
terminals.
Connect terminal No. 3 to the battery positive termi-
nal and terminal No. 1 and No. 2 to the battery
ground terminal, and check room light operation.
LI-00315
(A)
LI-00316
(B)
Switch position
Terminal No.
Standard
OFF
—
1 M
: or more
ON
1 and 3
1.5
r0.5 :
DOOR
2 and 3
1.5
r0.5 :
Switch position
Light status
OFF
Light OFF
ON
Light ON
DOOR
Light ON
LI-00257
3 2 1
LI-34
Luggage Room Light
LIGHTING SYSTEM
30.Luggage Room Light
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the luggage room light body (A).
3) Disconnect the harness connector and remove
the lens.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. LUGGAGE ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
2. LUGGAGE ROOM LIGHT SWITCH
Measure the resistance between luggage room
light switch terminals.
Switch position
Terminal No.
Standard
OFF
—
1 M
: or more
ON
1 and 2
1.5
r0.5 :
DOOR
2 and 3
1.5
r0.5 :
LI-00258
(A)
LI-00259
3
2
1
LI-35
Trunk Room Light
LIGHTING SYSTEM
31.Trunk Room Light
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Turn the trunk room light counterclockwise 60°
to remove it and disconnect the harness connector.
3) Remove bulb (A).
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
LI-00321
LI-00286
(A)
LI-36
Glove Box Light
LIGHTING SYSTEM
32.Glove Box Light
A: REMOVAL
1) Remove the glove box. <Ref. to EI-52, REMOV-
AL, Glove Box.>
2) Disconnect the harness connector.
3) Remove the glove box light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification.
<Ref. to LI-2, SPECIFICATION, General Descrip-
tion.>
3) If NG, replace the bulb with a new part.
LI-00323
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст