Subaru Legacy III (2000-2003 year). Service manual — part 924
LI-30
LIGHTING SYSTEM
SIDE TURN SIGNAL LIGHT
26.Side Turn Signal Light
A: REMOVAL
1) Disconnect ground cable from battery.
2) Pull out the light from body while pushing it in di-
rection of vehicle front.
3) Disconnect harness connector and remove the
light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Check the bulb for blow out using a tester.
2) If NG, replace the side turn signal light assembly
with a new one.
LI-00067
LI-31
LIGHTING SYSTEM
SPOT LIGHT
27.Spot Light
A: REMOVAL
1) Disconnect ground cable from battery.
2) Remove lens (A) and spot light mounting screw
(B).
3) Disconnect harness connectors and remove
spot light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. SPOT LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
2. SPOT LIGHT SWITCH
Measure spot light resistance.
Switch position
Terminal No.
Standard
OFF
—
More than 1 M
Ω
ON
1 and 2
18
±
5.4
Ω
LI-00109
( A )
( B )
LI-32
LIGHTING SYSTEM
ROOM LIGHT
28.Room Light
A: REMOVAL
1) Disconnect ground cable from battery.
2) Remove lens (A) and room light mounting
screws (B).
3) Disconnect harness connectors and remove the
light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
2. ROOM LIGHT SWITCH
Measure room light switch resistance.
Switch position
Terminal No.
Standard
OFF
—
More than 1 M
Ω
ON
1 and 3
1.5
±
0.5
Ω
DOOR
1 and 2
1.5
±
0.5
Ω
LI-00040
( A )
( B )
( B )
LI-00041
R52
2 1
3
LI-33
LIGHTING SYSTEM
LUGGAGE ROOM LIGHT
29.Luggage Room Light
A: REMOVAL
1) Disconnect ground cable from battery.
2) Remove lens (A) and luggage room light mount-
ing screws (B).
3) Disconnect harness connectors and remove lug-
gage room light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. LUGGAGE ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
2. LUGGAGE ROOM LIGHT SWITCH
Measure luggage room light resistance.
LI-00042
( A )
( B )
( B )
Switch position
Terminal No.
Standard
OFF
—
More than 1 M
Ω
ON
1 and 3
1.5
±
0.5
Ω
DOOR
1 and 2
1.5
±
0.5
Ω
( 2 )
( 1 )
( 3 )
LI-00043
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст