Subaru Legacy III (2000-2003 year). Service manual — part 654
RS-4
REAR SUSPENSION
GENERAL DESCRIPTION
2. SHOCK ABSORBER
(1) Mount
(4) Coil spring
Tightening torque: N·m (kgf-m, ft-lb)
(2) Rubber seat upper
(5) Shock absorber
T1: 30 (3.1, 22.4)
(3) Dust cover
(6) Self-locking nut
T2: 35 (3.6, 26)
T3: 160 (16.3, 118)
RS-00037
( 4 )
( 5 )
( 6 )
( 6 )
( 6 )
( 3 )
( 2 )
( 1 )
T3
T2
T1
RS-5
REAR SUSPENSION
GENERAL DESCRIPTION
C: CAUTION
• Wear working clothing, including a cap, protective goggles, and protective shoes during operation.
• Remove contamination including dirt and corrosion before removal, installation or disassembly.
• Keep the disassembled parts in order and protect them from dust or dirt.
• Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, in-
stallation, disassembly, and replacement.
• Use SUBARU genuine grease etc. or the equivalent. Do not mix grease etc. with that of another grade or
from other manufacturers.
• Be sure to tighten fasteners including bolts and nuts to the specified torque.
• Place shop jacks or safety stands at the specified points.
• Apply grease onto sliding or revolution surfaces before installation.
• Before installing O-rings or snap rings, apply sufficient amount of grease to avoid damage and deforma-
tion.
• Before securing a part on a vise, place cushioning material such as wood blocks, aluminum plate, or shop
cloth between the part and the vise.
• Before disposing shock absorbers, be sure to bleed gas completely. Also, do not throw away in fire.
D: PREPARATION TOOL
1. SPECIAL TOOLS
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
927380002
ADAPTER
Used as an adapter for camber & caster gauge
when measuring camber and caster.
(1) 28199AC000 PLATE
(2) 28199AC010 BOLT
20099AE000
INSTALLER &
REMOVER
Used for replacing link rear bushing.
ST-927380002
( 1 )
( 2 )
ST20099AE000
RS-6
REAR SUSPENSION
GENERAL DESCRIPTION
20099AE010
INSTALLER &
REMOVER
Used for replacing link upper bushing.
20099AE020
INSTALLER &
REMOVER SET
Used for replacing rear arm front bushing.
20099AE040
INSTALLER &
REMOVER SET
Used for replacing rear arm rear bushing.
20099AE030
HELPER SOCKET
WRENCH
Used for replacing helper.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST20099AE010
ST20099AE020
ST20099AE040
ST20099AE030
RS-7
REAR SUSPENSION
GENERAL DESCRIPTION
2. GENERAL PURPOSE TOOLS
927760000
STRUT MOUNT
SOCKET
Used for disassembling and assembling strut and
shock mount.
TOOL NAME
REMARKS
Alignment gauge
Used for wheel alignment measurement.
Turning radius gauge
Used for wheel alignment measurement.
Toe-in gauge
Used for toe-in measurement.
Transmission jack
Used for suspension assembly/disassembly.
Bearing puller
Used for removing bushings.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST-927760000
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст