Opel Frontera UBS. Service manual — part 2871
![](/vehicle/goneen/quin/cui/dickel.png)
8F–78
BODY STRUCTURE
Tailgate Strikers
Adjustment
683RW012
1. Loosen the striker screws (3) (or bolts (2)).
2. Tap the striker (1) with a plastic hammer to align.
3. Tighten the striker screws (3) (or bolts (2)).
Screw Torque : 15 N
•
m (1.5kg·m/11 lb ft)
Bolt Torque : 12 N
•
m (1.2kg·m/104 lb in)
Tailgate Stopper Assembly
Parts Location
683RS010
Legend
(1) Tailgate
(2) Rear Bumper
(3) Tailgate Stopper Assembly
Removal
1. Remove tailgate stopper assembly.
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Tighten the fixing bolts to the specified torque.
Torque : 12 N
•
m (1.2kg·m/104 lb in)
2. Apply chassis grease to the stopper moving surface.
![](/vehicle/goneen/quin/cui/vethe.png)
8F–79
BODY STRUCTURE
Tailgate Dove-Tail
Parts Location
683RW011
Legend
(1) Dove-Tail
(2) Fixing Bolt
(3) Tailgate Striker
(4) Rear Bumper
(5) Tailgate (LH)
Removal
1. Remove tailgate dove-tail.
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Apply chassis grease to the dove–tail (A) moving
surface.
2. Tighten the fixing bolts to the specified torque.
Torque : 12 N
•
m (1.2kg·m/104 lb in)
![](/vehicle/goneen/quin/cui/gllise.png)
8F–80
BODY STRUCTURE
Tailgate Dove-Tail Striker
Adjustment
683RS012
1. Loosen the striker bolts.
2. Tap with a plastic hammer to align.
D
Gaps between Dove–Tail Striker (2) and bracket (1)
are 0 mm (No clearance).
683RS013
3. Tighten striker bolts.
Torque : 12 N
•
m (1.2kg·m/104 lb in)
![](/vehicle/goneen/quin/cui/ikng.png)
8F–81
BODY STRUCTURE
Tailgate Frame Cover (LH)
Parts Location
684RW001
Legend
(1) High Mount Stop Light
(2) Washer Tube
(3) Tailgate Frame Cover
Removal
1. Disconnect the battery ground cable.
2. Remove tailgate frame cover.
D
Pull the tailgate frame cover (2) out.
D
Disconnect the washer tube (1) at the nozzle and
pull the washer tube out from the frame cover (2).
D
Disconnect the rear defogger and pull the harness
from the cover.
684RW002
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Hit the lower A edge portion of the cover (1) to the
tailgate flange.
2. Clearance between the frame cover and the tailgate
panel (B portion) is 1 mm (0.04 in).
684RS008
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст