Opel Frontera UBS. Service manual — part 2870
8F–74
BODY STRUCTURE
Tailgate Assembly (LH)
Parts Location
681RW008
Legend
(1) Tailgate Fixing Bolt
(2) Tailgate Hinge
(3) Tailgate Harness Connection
(4) Tailgate Stopper Assembly
(5) Tailgate Trim Panel (LH)
(6) Tailgate Assembly (LH)
Removal
1. Disconnect the battery ground cable.
2. Remove tailgate time panel (LH).
D
Refer to Tailgate Trim Panel (LH) in Exterior /
Interior Trim section.
3. Remove tailgate stopper assembly
4. Remove tailgate harness connection.
D
Open the luggage trim panel lid and disconnect the
tailgate harness connection.
810RS003
8F–75
BODY STRUCTURE
5. Remove tailgate fixing bolts.
681RS002
6. Remove tailgate assembly (LH).
7. Remove tailgate hinge.
D
Apply a setting mark (1) on the body side hinge and
remove the hinge fixing bolts.
681RW007
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Apply chassis grease to the tailgate hinge and the
tailgate stopper moving surface.
2. Align the tailgate fitting to the body by referring to
Body Dimension in this section.
3. Tighten the hinge bolts to the specified torque.
Torque : 34 N
•
m (3.5kg·m/25 lb ft)
8F–76
BODY STRUCTURE
Tailgate Assembly (RH)
Parts Location
681RS004
Legend
(1) Tailgate Assembly (RH)
(2) Tailgate Trim Panel (RH)
(3) Tailgate Harness Connection
(4) Rear Combination Light (RH)
(5) Tailgate Fixing Bolt
(6) Tailgate Hinge
Removal
1. Disconnect the battery ground cable.
2. Remove rear combination light (RH).
3. Remove tailgate trim panel (RH).
D
Refer to Tailgate Trim Panel (RH) in Exterior /
Interior section.
4. Remove tailgate harness connection.
D
Disconnect the tailgate harness connection.
810RS004
8F–77
BODY STRUCTURE
5. Remove tailgate fixing bolt.
681RS005
6. Remove tailgate assembly (RH).
7. Remove tailgate hinge.
D
Apply a setting mark (1) on the body side hinge and
remove the hinge fixing bolts.
681RW006
Installation
To install, follow the removal steps in the reverse order,
noting the following point.
1. Apply chassis grease to the tailgate hinge moving
surface.
2. Align the tailgate fitting to the body. Refer to Body
Dimension in this section.
3. Tighten the hinge bolts to the specified torque.
Torque : 34 N
•
m (3.5kg·m/25 lb ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст