Infiniti G20 (P11). Manual — part 80
![](/vehicles/zatt/wheiso/zix/syby.png)
SAT073F
c.
Install reamer bolts F from bottom of upper body. Using reamer
bolts as guides, install separating plate and gaskets as a seat.
SAT074F
d.
Install pilot filter.
SAT870J
e.
Place inter body as shown in the illustration. Install steel balls
in their proper positions.
SAT076F
f.
Install inter body on upper body using reamer bolts F as
guides.
I
Be careful not to dislocate or drop steel balls.
SAT873J
g.
Install check balls, oil cooler relief valve springs and T/C pres-
sure holding spring in their proper positions in lower body.
GI
MA
EM
LC
EC
FE
CL
MT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
REPAIR FOR COMPONENT PARTS
Control Valve Assembly (Cont’d)
AT-317
![](/vehicles/zatt/wheiso/zix/mburald.png)
SAT077F
h.
Install lower separating gasket, inner separating gasket and
lower separating plate in order shown in the illustration.
SAT078F
i.
Install bolts E from bottom of lower body. Using bolt E as
guides, install separating plate and gaskets as a set.
j.
Install support plates on lower body.
AAT536
k.
Install lower body on inter body using reamer bolts F as guides
and tighten reamer bolts F slightly.
SAT317G
2.
Install O-rings to solenoid valves and terminal body.
I
Apply ATF to O-rings.
3.
Install and tighten bolts.
Bolt length, number and location:
Bolt symbol
A
B
C
D
E
F
G
Bolt length “
”
13.5 mm
(0.531 in)
58.0 mm
(2.283 in)
44.0 mm
(1.732 in)
66.0 mm
(2.598 in)
33.0 mm
(1.299 in)
78.0 mm
(3.071 in)
18.0 mm
(0.709 in)
Number of bolts
6
3
6
11
2
2
1
F: Reamer bolt with nut
REPAIR FOR COMPONENT PARTS
Control Valve Assembly (Cont’d)
AT-318
![](/vehicles/zatt/wheiso/zix/xxcag.png)
SAT869J
SAT081F
a.
Install and tighten bolts B to specified torque.
: 7 - 9 N·m (0.7 - 0.9 kg-m, 61 - 78 in-lb)
SAT316GA
b.
Install solenoid valve assembly and line pressure solenoid
valve to lower body.
SAT323G
c.
Remove reamer bolts F and set oil strainer on control valve
assembly.
d.
Reinstall reamer bolts F from lower body side.
GI
MA
EM
LC
EC
FE
CL
MT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
REPAIR FOR COMPONENT PARTS
Control Valve Assembly (Cont’d)
AT-319
![](/vehicles/zatt/wheiso/zix/beesomme.png)
SAT083F
e.
Tighten bolts A, C, D and F to specified torque.
: 7 - 9 N·m (0.7 - 0.9 kg-m, 61 - 78 in-lb)
SAT084FA
f.
Tighten bolts E to specified torque.
: 3.4 - 4.4 N·m (0.35 - 0.45 kg-m, 30.4 - 39.1 in-lb)
REPAIR FOR COMPONENT PARTS
Control Valve Assembly (Cont’d)
AT-320
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст