Infiniti QX56 (JA60). Manual — part 8
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-23
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
DETAIL FLOW
EXIT ASSIST FUNCTION : Component Parts Location
INFOID:0000000005370291
Switch inputs
• Power seat switch
• Pedal adjusting switch
• ADP steering switch
• Door mirror remote control switch
• Set switch
• Seat memory switch
OFF
(Not operated)
A/T selector lever
P position
Item
Request status
Order
Input
Output
Control unit condition
1
Front door switch LH
—
Driver seat control unit receives front door switch LH signal (open)
from BCM via CAN communication.
2
—
Motors (seat sliding,
tilt)
Driver seat control unit operates the seat sliding motor, which recog-
nizes that the front door LH is opened with ignition switch OFF. Driv-
er seat control unit then requests the operation of the tilt motor to the
automatic drive positioner control unit via UART communication.
The automatic drive positioner control unit operates the motor for a
constant amount.
ALJIA0347ZZ
ADP-24
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
EXIT ASSIST FUNCTION : Component Description
INFOID:0000000005147440
CONTROL UNITS
INPUT PARTS
Switches
Sensors
OUTPUT PARTS
ENTRY ASSIST FUNCTION
1.
A. Automatic drive positioner control
unit M33, M34
B. Pedal adjusting motor assembly
E109, E110
2.
A. Steering column
B. Key switch and ignition knob
switch M12
C. BCM M18, M19, M20 (view with
instrument panel removed)
3.
A. Door mirror remote control switch
D10
B. Seat memory switch D5
4.
Pedal adjusting switch M96
5.
A. Door mirrror LH D4, RH D107
B. Front door switch LH B
6.
A. A/T selector lever
B. A/T shift selector (park position
switch) M203
7.
A. Sliding motor LH B204 (driver seat
view), reclining motor LH B205, lift-
ing motor (front) B206, lifting motor
(rear) B207
B. Driver seat control unit B202,
B203
C. Power seat switch LH B208
8.
A. ADP steering switch M16
B. Tilt sensor M85 and tilt motor M86
Item
Function
Driver seat control unit
• Operates the seat sliding motor for a constant amount.
• Driver seat control unit requests the operation of the tilt motor to the automatic
drive positioner control unit via UART communication.
Automatic drive positioner control unit
Operates the tilt motor for a constant amount.
BCM
Recognizes the following status and transmits it to the driver seat control unit via
CAN communication.
• Front door LH: OPEN/CLOSE
Item
Function
Front door switch LH
Detect front door LH open/close status.
Item
Function
Sliding sensor
Detect the front/rear position of seat.
Tilt sensor
Detect the up/down position of steering wheel.
Item
Function
Sliding motor
Slide the seat forward/backward.
Tilt motor
Moves the steering wheel upward/downward.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-25
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
ENTRY ASSIST FUNCTION : System Diagram
INFOID:0000000005147441
ENTRY ASSIST FUNCTION : System Description
INFOID:0000000005147442
OUTLINE
The seat and steering wheel are in the exiting position when either following condition (A or B) is satisfied, the
seat and steering wheel return from exiting position to the previous driving position.
NOTE:
• This function is set to OFF before delivery (initial setting).
• Further information for the system setting procedure. Refer to Owner’s Manual.
OPERATION PROCEDURE
1. A: Turn the ignition switch ON.
B: Turn the ignition switch from OFF to ACC after closing the driver door.
2. Front seat LH and steering wheel will return from the exiting position to entry position.
OPERATION CONDITION
Satisfy all of the following items. The entry assist function is not performed if these items are not satisfied.
DETAIL FLOW
ALJIA0238GB
Item
Request status
Seat, steering wheel
The vehicle is not moved after performing the
exit assist function.
Switch inputs
• Power seat switch
• Pedal adjusting switch
• ADP steering switch
• Door mirror control switch
• Set switch
• Memory switch
OFF
(Not operated)
A/T selector lever
P position
ADP-26
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
ENTRY ASSIST FUNCTION : Component Parts Location
INFOID:0000000005370292
Order
Input
Output
Control unit condition
1
Door switch/Ignition
switch
—
Driver seat control unit receives the signals of ignition switch signal
and front door switch from BCM via CAN communication.
2
—
Motors (sliding, tilt)
Driver seat control unit operates the sliding motor when the operating
conditions are satisfied. Driver seat control unit then requests the op-
eration of the tilt motor to the automatic drive positioner control unit
via UART communication. The automatic drive positioner control unit
operates the motor for a constant amount.
Sensors (sliding, tilt)
—
Sensors monitor the operating positions of seat and steering wheel
and then stops the operation of each motor when each part reaches
the recorded address.
ALJIA0347ZZ
1.
A. Automatic drive positioner control
unit M33, M34
B. Pedal adjusting motor assembly
E109, E110
2.
A. Steering column
B. Key switch and ignition knob
switch M12
C. BCM M18, M19, M20 (view with
instrument panel removed)
3.
A. Door mirror remote control switch
D10
B. Seat memory switch D5
4.
Pedal adjusting switch M96
5.
A. Door mirrror LH D4, RH D107
B. Front door switch LH B
6.
A. A/T selector lever
B. A/T shift selector (park position
switch) M203
7.
A. Sliding motor LH B204 (driver seat
view), reclining motor LH B205, lift-
ing motor (front) B206, lifting motor
(rear) B207
B. Driver seat control unit B202,
B203
C. Power seat switch LH B208
8.
A. ADP steering switch M16
B. Tilt sensor M85 and tilt motor M86
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст