Infiniti G35 (V35) Sedan. Manual — part 1397
![](/vehicles/zatt/tenge/outheneren/anus.png)
TM-280
< REMOVAL AND INSTALLATION >
[5AT: RE5R05A]
TRANSMISSION ASSEMBLY
INSTALLATION
Install the removed parts in the reverse order of the removal, while paying attention to the following work.
• When installing A/T assembly to the engine assembly, attach the
fixing bolts in accordance with the following standard.
• Align the positions of tightening bolts for drive plate with those of
the torque converter, and temporarily tighten the bolts. Then,
tighten the bolts with the specified torque.
CAUTION:
• When turning crankshaft, turn it clockwise as viewed from the
front of the engine.
• When tightening the tightening bolts for the torque converter
after fixing the crankshaft pulley bolts, be sure to confirm the
tightening torque of the crankshaft pulley mounting bolts.
Refer to
.
• After converter is installed to drive plate, rotate crankshaft
several turns and check to be sure that A/T rotates freely with-
out binding.
• Install crankshaft position sensor (POS). Refer to
AWD : Inspection
INFOID:0000000000957185
INSPECTION AFTER INSTALLATION
• Installation and Inspection of Torque Converter
- After inserting a torque converter to a A/T, be sure to check dis-
tance (A) to ensure it is within the reference value limit.
• After completing installation, check the following item.
- A/T fluid leakage and A/T fluid level. Refer to
- A/T position. Refer to
TM-230, "AWD : Inspection and Adjustment"
A
: View from vehicle front
: Transmission to engine
: Engine to transmission
Bolt No.
B
C
Number of bolts
8
4
Bolt length
”mm (in)
65 (2.56)
35 (1.38)
Tightening torque
N·m (kg-m, ft-lb)
75 (7.7, 55)
46.6 (4.8, 34)
JPDIA0043ZZ
JPDIA0044ZZ
B
: Scale
C
: Straightedge
Distance (A)
: Refer to
JPDIA0042ZZ
![](/vehicles/zatt/tenge/outheneren/yomi.png)
TRANSMISSION ASSEMBLY
TM-281
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
DISASSEMBLY AND ASSEMBLY
TRANSMISSION ASSEMBLY
Exploded View
INFOID:0000000000957186
SCIA7983E
![](/vehicles/zatt/tenge/outheneren/veshi.png)
TM-282
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
TRANSMISSION ASSEMBLY
1.
O-ring
2.
Oil pump cover
3.
O-ring
4.
Oil pump housing
5.
Self-sealing bolt
6.
Torque converter
7.
Converter housing
8.
Oil pump housing oil seal
9.
Bearing race
10.
Needle bearing
11.
O-ring
12.
Front carrier assembly
13.
Needle bearing
14.
Snap ring
15.
Front sun gear
16.
3rd one-way clutch
17.
Snap ring
18.
Bearing race
19.
Needle bearing
20.
Seal ring
21.
Input clutch assembly
22.
Needle bearing
23.
Rear internal gear
24.
Brake band
25.
Mid carrier assembly
26.
Needle bearing
27.
Bearing race
28.
Rear carrier assembly
29.
Needle bearing
30.
Mid sun gear
31.
Seal ring
32.
Rear sun gear
33.
1st one-way clutch
34.
Snap ring
35.
Needle bearing
36.
High and low reverse clutch hub
37.
Snap ring
38.
Bearing race
39.
Needle bearing
: Apply Genuine RTV silicone sealant or equivalent. Refer to
GI-15, "Recommended Chemical Products and Sealants"
for symbols not described on the above.
![](/vehicles/zatt/tenge/outheneren/junoros.png)
TRANSMISSION ASSEMBLY
TM-283
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
1.
Needle bearing
2.
Bearing race
3.
High and low reverse clutch assembly
4.
Needle bearing
5.
Direct clutch assembly
6.
Reverse brake dish plate
7.
Reverse brake dish plate
8.
Reverse brake driven plate
9.
N-spring
10. Reverse brake drive plate
11.
Reverse brake retaining plate
12. Snap ring
13. D-ring
14. D-ring
15. Reverse brake piston
SCIA8365E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст