Infiniti I35 (A33). Manual — part 13
SAT019K
9.
Perform driving test according to “DTC CONFIRMATION PRO-
CEDURE” in “TROUBLE DIAGNOSIS FOR DTC”.
SAT591J
I
When testing conditions are satisfied, CONSULT-II screen
changes from “OUT OF CONDITION” to “TESTING”.
SAT592J
SAT593J
10. Stop vehicle. If “NG” appears on the screen, malfunction may
exist. Go to “DIAGNOSTIC PROCEDURE”.
SAT594J
11. Perform test drive to check gear shift feeling in accordance
with instructions displayed.
GI
MA
EM
LC
EC
FE
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
CONSULT-II (Cont’d)
AT-49
SAT595J
12. Touch “YES” or “NO”.
SAT596J
SAT593J
13. CONSULT-II procedure ended.
If “NG” appears on the screen, a malfunction may exist. Go to
“DIAGNOSTIC PROCEDURE”.
DTC WORK SUPPORT MODE
NHAT0022S05
DTC work support item
Description
Check item
1ST GR FNCTN P0731
Following items for “A/T 1st gear function (P0731)” can be con-
firmed.
I
Self-diagnosis status (whether the diagnosis is being con-
ducted or not)
I
Self-diagnosis result (OK or NG)
I
Shift solenoid valve A
I
Shift solenoid valve B
I
Each clutch
I
Hydraulic control circuit
2ND GR FNCTN P0732
Following items for “A/T 2nd gear function (P0732)” can be con-
firmed.
I
Self-diagnosis status (whether the diagnosis is being con-
ducted or not)
I
Self-diagnosis result (OK or NG)
I
Shift solenoid valve B
I
Each clutch
I
Hydraulic control circuit
3RD GR FNCTN P0733
Following items for “A/T 3rd gear function (P0733)” can be con-
firmed.
I
Self-diagnosis status (whether the diagnosis is being con-
ducted or not)
I
Self-diagnosis result (OK or NG)
I
Shift solenoid valve A
I
Each clutch
I
Hydraulic control circuit
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
CONSULT-II (Cont’d)
AT-50
DTC work support item
Description
Check item
4TH GR FNCTN P0734
Following items for “A/T 4th gear function (P0734)” can be con-
firmed.
I
Self-diagnosis status (whether the diagnosis is being con-
ducted or not)
I
Self-diagnosis result (OK or NG)
I
Shift solenoid valve A
I
Shift solenoid valve B
I
Overrun clutch solenoid valve
I
Line pressure solenoid valve
I
Each clutch
I
Hydraulic control circuit
TCC S/V FNCTN P0744
Following items for “A/T TCC S/V function (lock-up) (P0744)” can
be confirmed.
I
Self-diagnosis status (whether the diagnosis is being con-
ducted or not)
I
Self-diagnosis result (OK or NG)
I
Torque converter clutch sole-
noid valve
I
Each clutch
I
Hydraulic control circuit
GI
MA
EM
LC
EC
FE
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
CONSULT-II (Cont’d)
AT-51
Diagnostic Procedure Without CONSULT-II
=NHAT0023
OBD-II SELF-DIAGNOSTIC PROCEDURE (WITH GST)
NHAT0023S01
Refer to EC-114, “Generic Scan Tool (GST)”.
OBD-II SELF-DIAGNOSTIC PROCEDURE (NO
TOOLS)
NHAT0023S02
Refer to EC-90, “Malfunction Indicator Lamp (MIL)”.
TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)
NHAT0023S03
1
CHECK A/T CHECK INDICATOR LAMP
1. Move selector lever to P position.
Start engine and warm it up to normal engine operating temperature.
2. Turn ignition switch to OFF position.
3. Wait 5 seconds.
4. Turn ignition switch to ON position.
(Do not start engine.)
SAT491K
5. Does A/T CHECK indicator lamp come on for about 2 seconds?
SAT604K
Yes or No
Yes
©
GO TO 2.
No
©
Stop procedure. Perform “A/T CHECK Indicator Lamp Does Not Come On”, AT-222
before proceeding.
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
Diagnostic Procedure Without CONSULT-II
AT-52
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст