Infiniti I35 (A33). Manual — part 426
FIG. 4
NHEL0114S06
MEL676R
GI
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
REMOTE KEYLESS ENTRY SYSTEM
Wiring Diagram — KEYLES — (Cont’d)
EL-305
SEL580YA
REMOTE KEYLESS ENTRY SYSTEM
Wiring Diagram — KEYLES — (Cont’d)
EL-306
SEF289X
CONSULT-II Inspection Procedure
NHEL0241
“MULTI REMOTE ENT”
NHEL0241S01
1.
Turn ignition switch “OFF”.
2.
Connect “CONSULT-II” and “CONSULT-II CONVERTER” to
the data link connector.
SKIA3098E
3.
Turn ignition switch “ON”.
4.
Touch “START (NISSAN BASED VHCL)”.
SEL398Y
5.
Touch “SMART ENTRANCE”.
If “SMART ENTRANCE” is not indicated, go to GI-42.
SEL401Y
6.
Touch “MULTI REMOTE ENT”.
SEL274W
7.
Select diagnosis mode.
“DATA MONITOR”, “ACTIVE TEST” and “WORK SUPPORT”
are available.
GI
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
REMOTE KEYLESS ENTRY SYSTEM
CONSULT-II Inspection Procedure
EL-307
CONSULT-II Application Items
NHEL0242
“MULTI REMOTE ENT”
NHEL0242S01
Data Monitor
NHEL0242S0101
Monitored Item
Description
IGN ON SW
Indicates [ON/OFF] condition of ignition switch in ON position.
ACC ON SW
Indicates [ON/OFF] condition of ignition switch in ACC position.
DOOR SW-RR
Indicates [ON/OFF] condition of rear door switch.
KEY ON SW
Indicates [ON/OFF] condition of key switch.
DOOR SW-DR
Indicates [ON/OFF] condition of front door switch LH.
DOOR SW-AS
Indicates [ON/OFF] condition of door switch RH.
LOCK SW DR/AS
Indicates [ON/OFF] condition of lock signal from lock/unlock switch LH and RH.
UNLK SW DR/AS
Indicates [ON/OFF] condition of unlock signal from lock/unlock switch LH and RH.
KEY CYL LK-SW
Indicates [ON/OFF] condition of lock signal from key cylinder switch.
LK BUTTON/SIG
Indicates [ON/OFF] condition of lock signal from keyfob.
UN BUTTON/SIG
Indicates [ON/OFF] condition of unlock signal from keyfob.
TRUNK BTN/SIG
Indicates [ON/OFF] condition of trunk open signal from keyfob.
PANIC BTN
Indicates [ON/OFF] condition of panic signal from keyfob.
UN BUTTON ON
Indicates [ON/OFF] condition of unlock switch form keyfob.
LK/UN BTN ON
Indicates [ON/OFF] condition of lock/unlock signal at the same time from keyfob.
Active Test
NHEL0242S0102
Test Item
Description
INT/IGN ILLUM
This test is able to check interior lamp and ignition key hole illumination operation. The interior
lamp and ignition key hole illumination are turned on when “ON” on CONSULT-II screen is
touched.
HAZARD
This test is able to check hazard reminder operation. The hazard lamp turns on when “ON” on
CONSULT-II screen is touched.
TRUNK OUTPUT
This test is able to check trunk lid opener actuator operation. The trunk is unlocked when “ON”
on CONSULT-II screen is touched.
HORN
This test is able to check panic alarm and horn reminder operations. The alarm activate for 0.5
seconds after “ON” on CONSULT-II screen is touched.
HEAD LAMP
This test is able to check headlamps panic alarm operation. The headlamp illuminates for 0.5
seconds after “ON” on CONSULT-II screen is touched.
PW REMOTE DOWN SET
This test is able to check power window open operation. The front power windows activate for
10 seconds after “ON” on CONSULT-II screen is touched.
Work Support
NHEL0242S0103
Test Item
Description
REMO CONT ID CONFIR
It can be checked whether keyfob ID code is registered or not in this mode.
REMO CONT ID REGIST
Keyfob ID code can be registered.
REMO CONT ID ERASUR
Keyfob ID code can be erased.
MULTI ANSWER BACK SET
Hazard and horn reminder mode can be changed with this mode. Selects hazard and horn
reminder mode among six steps (EL-298).
REMOTE KEYLESS ENTRY SYSTEM
CONSULT-II Application Items
EL-308
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст