Infiniti Q45 (FY33). Manual — part 392
“Diagnostic Signals From the Car” MODE
Description
In “Diagnostic Signals From the Car” mode, following input signals
to the display & NAVI control unit can be checked on the display.
Item
Indication
Vehicle condition
Vehicle
Speed*
ON
Vehicle speed is greater than 0 km/h (0 MPH).
OFF
Vehicle speed is 0 km/h (0 MPH).
Light
ON
Lighting switch is in 1st or 2nd position.
OFF
Lighting switch is in “OFF” position.
IGN
ON
Ignition switch is in “ON” position.
OFF
Ignition switch is in “ACC” position.
REVERSE*
ON
Selector/shift lever is in “Reverse” position.
OFF
Selector/shift lever is in other than “Reverse” posi-
tion.
*: When ignition switch is in “ACC” position, indication will be changed to “-”.
SEL584X
How to perform
1.
Start the engine.
2.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
3.
Touch “Confirmation/ adjustment”.
SEL588X
4.
Touch “Diagnostic Signals from the Car”.
SEL591X
5.
Then “Diagnostic Signals from the Car” mode is performed.
GI
MA
EM
LC
EC
FE
AT
PD
FA
RA
BR
ST
RS
BT
HA
IDX
NAVIGATION SYSTEM
Self-diagnosis Mode (Cont’d)
EL-559
SEL584X
“Check the map CD-ROM version” MODE
How to perform
1.
Start the engine.
2.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
3.
Touch “Confirmation/ adjustment”.
SEL588X
4.
Touch “Navigation”.
SEL589X
5.
Touch “Check the map CD-ROM version”.
SEL592X
6.
The version (parts number) of CD-ROM loaded to the display
and NAVI control unit will be displayed.
NAVIGATION SYSTEM
Self-diagnosis Mode (Cont’d)
EL-560
“Display Diagnosis” MODE
Description
Use the “Diagnosis Display” mode to check the display color bright-
ness and shading. The display & NAVI control unit must be
replaced if the color brightness and shading are abnormal.
SEL584X
How to perform
1.
Start the engine.
2.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
3.
Touch “Confirmation/ adjustment”.
SEL588X
4.
Touch “Display Diagnosis”.
SEL593X
5.
Touch “Display color spectrum bar” or “Display gradation bar”.
6.
Then color bar/gray scale will be displayed.
SEL594X
GI
MA
EM
LC
EC
FE
AT
PD
FA
RA
BR
ST
RS
BT
HA
IDX
NAVIGATION SYSTEM
Self-diagnosis Mode (Cont’d)
EL-561
“Longitude & Latitude” MODE
Description
The “Longitude & Latitude” is used to confirm the longitude and
latitude of some optional area point.
SEL584X
How to perform
1.
Start the engine.
2.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
3.
Touch “Confirmation/ adjustment”.
SEL588X
4.
Touch “Navigation”.
SEL589X
5.
Touch “Longitude & Latitude”.
SEL595X
6.
Adjust the pointer with using the joystick and touch “Set”.
7.
The longitude and latitude are displayed.
NAVIGATION SYSTEM
Self-diagnosis Mode (Cont’d)
EL-562
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст