Infiniti Q45 (FY33). Manual — part 393
![](/vehicles/zatt/fitanyou/tushi/ndis.png)
“Adjust the angle” MODE
Description
If the display indicates a larger or smaller turning angle than the
actual turning angle, the gyro (angular speed sensor) sensing val-
ues must be checked.
In case that the vehicle on the display makes larger angle turn than
reality, touch “−”. In case that the vehicle on the display makes
smaller angle turn than reality, touch “+”.
SEL584X
How to perform
1.
Start the engine.
2.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
3.
Touch “Confirmation/ adjustment”.
SEL588X
4.
Touch “Navigation”.
SEL589X
5.
Touch “Adjust the angle”.
SEL596X
6.
Touch “Left Turn” to adjust the angle to the left. Touch “Right
Turn” to adjust the angle to the right.
7.
Touch “+” to increase the angle change coefficient or “−” to
reduce the angle change coefficient.
8.
Touch “Set” to save the changed values in memory.
9.
Then the vehicle turning angle on the display has adjusted.
GI
MA
EM
LC
EC
FE
AT
PD
FA
RA
BR
ST
RS
BT
HA
IDX
NAVIGATION SYSTEM
Self-diagnosis Mode (Cont’d)
EL-563
![](/vehicles/zatt/fitanyou/tushi/lkin.png)
SEL584X
SPEED CALIBRATION
1.
Start the engine.
2.
Push both “MAP” and “D/N” switches at the same time for more
than 5 seconds.
3.
Touch “Confirmation/ adjustment”.
4.
Touch “Navigation”.
SEL589X
5.
Touch “Speed Calibration”.
SEL596X
6.
Touch “+” or “−” to adjust the distance change coefficient.
I
To make the distance change coefficient smaller, touch “−”.
I
To make the distance change coefficient larger, touch “+”.
7.
Touch “Set”.
NAVIGATION SYSTEM
Self-diagnosis Mode (Cont’d)
EL-564
![](/vehicles/zatt/fitanyou/tushi/lde.png)
Setting Mode
APPLICATION ITEMS
Mode
Description
Reference page
GPS Information
The GPS includes longtitude, latitude and altitude (distance above sea level) of the
present vehicle position, and current date and time for the area in which the vehicle is
being driven.
Also indicated are the GPS reception conditions and the GPS satellite position.
Quick Stop Customer
Setting
One facility of your selection can be added to your Quick Stop.
Route Priorities
Priorities of search request and automatic re-searching can be set for route search.
Tracking
Tracking to the present vehicle position can be displayed.
Display Setting
The following display settings can be customized.
I
Display color (Day mode or Night mode)
I
Brightness of display
Heading
Heading of the map display can be customized for either north heading or the actual
driving direction of the vehicle.
Nearby Display Icons
Icons of facilities can be displayed.
Facilities to be displayed can be selected from the variety of selections.
Adjust Current Loca-
tion
Current location of position marker can be set. Direction of position marker also can be
calibrated when heading direction of the vehicle on the display is not matched with the
actual direction.
Avoid Area Setting
Set the display to the avoid area.
This allows you to check alternate routes from your present location.
—
Beep On/Off
Beep sounds which correspond to the system operation can be activated/deactivated.
Clear Memory
Customized map data can be deleted.
MAP
SEL597X
HOW TO PERFORM CONTROL PANEL MODE
1.
Start the engine.
2.
Push “MAP” switch.
I
For further procedures, refer to the following pages which
describe each application item of the control panel mode.
SEL598X
“GPS Information” SETTING
1.
Start the engine.
2.
Push “MAP” switch.
3.
Touch “Setting”.
GI
MA
EM
LC
EC
FE
AT
PD
FA
RA
BR
ST
RS
BT
HA
IDX
NAVIGATION SYSTEM
EL-565
![](/vehicles/zatt/fitanyou/tushi/sede.png)
SEL599X
4.
Touch “System Setting”.
SEL600X
5.
Touch “GPS Information”.
SEL146W
6.
Then GPS information will be displayed.
SEL598X
“Adjust Current Location” SETTING
1.
Start the engine.
2.
Push “MAP” switch.
3.
Touch “Setting”.
4.
Touch “System Setting”.
SEL601X
5.
Touch “Adjust Current Location”.
NAVIGATION SYSTEM
Setting Mode (Cont’d)
EL-566
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст