Infiniti M35/M45 Y50. Manual — part 281
![](/vehicles/zatt/cen/houeebante/wda.png)
DOOR
BL-193
C
D
E
F
G
H
J
K
L
M
A
B
BL
REAR DOOR
REMOVAL
1.
Remove the mounting bolts of the check link on the vehicle. Refer to
BL-189, "Removal and Installation of
or
BL-190, "Removal and Installation of Rear Door"
2.
Remove the weatherstrip clips and remove weatherstrip.
CAUTION:
After removal, do not pull strongly on the weatherstrip.
INSTALLATION
Install in the reverse order of removal.
Install the door weatherstrip (A) and along the arrow direction.
1.
Door weatherstrip
2.
Rear door
3.
Door sash molding
PIIB3879J
![](/vehicles/zatt/cen/houeebante/yeghmyod.png)
BL-194
FRONT DOOR LOCK
FRONT DOOR LOCK
PFP:80502
Component Structure
NIS001ZD
Removal and Installation
NIS001ZE
REMOVAL
1.
Remove the front door finisher. Refer to
EI-34, "Removal and Installation"
.
2.
Disconnect the inside handle knob cable and lock knob cable
from the back side of the front door finisher.
3.
Remove the front door window and front door module assembly. Refer to
.
4.
Remove door side grommet, and remove door key cylinder assembly (driver side) and outside handle
escutcheon (passenger side) bolts from grommet hole.
1.
Outside handle
2.
Front gasket
3.
Lock knob cable
4.
Inside handle
5.
Inside handle knob cable
6.
Door lock assembly
7.
Outside handle cable
8.
Key cylinder rod (Driver side only)
9.
Outside handle bracket
10. Grommet
11.
Rear gasket
12. Door key cylinder assembly (Driver
side)
Outside handle escutcheon (Pas-
senger side)
PIIB5806E
PIIB4933E
![](/vehicles/zatt/cen/houeebante/miroyoul.png)
FRONT DOOR LOCK
BL-195
C
D
E
F
G
H
J
K
L
M
A
B
BL
CAUTION:
Do not forcibly remove the TORX bolt.
5.
Disconnect door antenna and door request switch connector
and remove harness clamp. (Models with intelligent Key system)
6.
Reach to separate the key cylinder rod connection (on the handle).
7.
Disconnect door key cylinder switch harness connector.
8.
While pulling the outside handle, remove door key cylinder
assembly.
9.
Disconnect front door request switch harness connector (with Intelligent Key system).
10. While pulling outside handle, slide toward rear of vehicle to
remove outside handle.
PIIB5808E
PIIB5807E
PIIB5809E
PIIB5810E
![](/vehicles/zatt/cen/houeebante/dayasolomeni.png)
BL-196
FRONT DOOR LOCK
11. Remove the front gasket and rear gasket.
12. Remove the TORX bolts, remove the door lock assembly.
13. Remove the TORX bolt of the outside handle bracket.
14. While pulling outside handle bracket, slide toward rear of vehicle
to remove outside handle bracket.
15. Disconnect the door lock actuator connector and remove the door lock assembly.
PIIB5811E
PIIB5812E
PIIB5813E
PIIB5814E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст