Infiniti M35/M45 Y50. Manual — part 215
![](/vehicles/zatt/cen/houeebante/cong.png)
DIAGNOSIS SYSTEM
AV-237
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
AV
VEHICLE CAN DIAGNOSIS
●
CAN communication status and error counter is displayed.
●
Error counter displays 0 if any malfunction is not detected in the
past. If the malfunction is detected, it displays 40. When turning
the ignition switch ON, if it is normal, it displays 39. The lower
limit of the counter is 1.
●
If it is reset, the error counter is deleted.
NOTE:
??? indicates “UNKWN”.
AV COMM DIAGNOSIS
●
Displays the communication condition between AV (NAVI) con-
trol unit (master unit) and each unit and between audio unit
(sub-master unit) and each unit.
●
Error counter displays 0 if any malfunction is not detected in the
past. If the malfunction is detected, it displays 40. When turning
the ignition switch ON, if it is normal, it displays 39. The lower
limit of the counter is 1.
●
If it is reset, the error counter is deleted.
DVD-ROM Communication Error
●
Malfunction is detected on DVD-
ROM drive pickup lens in NAVI con-
trol unit
●
There is dirt and damage on the map
disc
●
Map disc
●
NAVI control unit
Refer to
DVD-ROM Read Error
DVD-ROM Disc Error
DVD-ROM Mechanism not Detected
DVD-ROM Mechanism Error
DVD-ROM Focus Error
DVD-ROM TOC Error
DVD-ROM Seek Error
DVD-ROM Error Correction Error
DVD-ROM Data Transfer Error
DVD-ROM Data Error
DVD-ROM Time-out
DVD-ROM Loading / Eject Error
CAN Controller Memory Error
AV (NAVI) control unit malfunction is
detected
Replace AV (NAVI) control unit
Refer to
AV-282, "AV (NAVI) Control Unit"
Bluetooth Module Connection Error
Error item
Description
Possible cause/Action to take
Items
Display (Current)
Error counter
(Past)
Tx (HVAC)
OK /???
0 - 40
Rx (ECM)
OK /???
0 - 40
Rx (Cluster)
OK /???
0 - 40
Rx (BCM)
OK /???
0 - 40
Rx (HVAC)
OK /???
0 - 40
Rx (USM)
OK /???
0 - 40
Rx (TPMS)
OK /???
0 - 40
SKIB3666E
Items
Status
(Current)
Counter
(Past)
C Tx (ITM-PrimarySW)
OK /???
0 - 40
C Rx (PrimarySW-ITM)
OK /???
0 - 40
C Rx (STRG SW-ITM)
OK /???
0 - 40
SKIB3667E
![](/vehicles/zatt/cen/houeebante/zai.png)
AV-238
[WITH MOBILE ENTERTAINMENT SYSTEM]
DIAGNOSIS SYSTEM
ITM: AV (NAVI) control unit
NOTE:
??? indicates “UNKWN”.
HANDSFREE PHONE
Handsfree Volume Adjustment
The received volume adjustment of hands-free phone can be
adjusted to Low, Medium, and High settings.
Voice Microphone Test
When this function is turned ON, the voice that is input to microphone is output to front speaker via TEL voice
signal line. The microphone and TEL voice signal line can be checked.
Delete Handsfree Memory
Erase the memory related to the hands-free phone.
REAR DISPLAY
●
Tilt angle (90 to 135 degrees, 105 to 135 degrees) of rear seat
display can be set.
●
The automatic retraction of rear seat display can be set.
C Rx (RrSeatSW-ITM)
OK /???
0 - 40
C Rx (Audio-ITM)
OK /???
0 - 40
C Rx (Amp-ITM)
OK /???
0 - 40
C Rx (RearCamera-ITM)
OK /???
0 - 40
C Rx (DVD-ITM)
OK /???
0 - 40
C Rx (Video DIST-ITM)
OK /???
0 - 40
C Rx (Remote Cont-ITM)
OK /???
0 - 40
C Rx (Amp-Audio)
OK /???
0 - 40
C Rx (DVD-Audio)
OK /???
0 - 40
Items
Status
(Current)
Counter
(Past)
SKIB3668E
SKIB3693E
![](/vehicles/zatt/cen/houeebante/ngomabes.png)
DIAGNOSIS SYSTEM
AV-239
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
AV
CAMERA CONT.
There are 2 functions: “Connection Confirmation”, “Adjust offset of rear view camera”.
Connection Confirmation
The input signals of steering angle sensor signal, reverse signal, and
vehicle speed signal can be checked.
Adjust Offset of Rear View Camera
If the adjustment of rear view monitor guiding line display position is
necessary when rear view camera is removed, use this mode to
adjust it.
SKIB3688E
Diagnosis item
Display
Vehicle status
Steering Angle Sensor
ON
It turns ON when the steering is turning with the ignition switch ON (Once it turns
ON, it does not change during Connection Confirmation mode)
OFF
Turn ignition switch ACC
It turns OFF when the steering is not turning with the ignition switch ON
—
Rear view monitor connection confirmation signal malfunction
Reverse Sensor
ON
Selector lever in R position with ignition switch ON
OFF
Turn ignition switch ACC
Selector lever in any position other than R with ignition switch ON
—
Rear view monitor connection confirmation signal malfunction
Vehicle Speed Sensor
ON
When vehicle speed is 0 km/h or more with ignition switch ON
OFF
Turn ignition switch ACC
When vehicle speed is 0 km/h with ignition switch ON
—
Camera-connection recognition signal malfunction
SKIB3689E
![](/vehicles/zatt/cen/houeebante/thilens.png)
AV-240
[WITH MOBILE ENTERTAINMENT SYSTEM]
DIAGNOSIS SYSTEM
BLUETOOTH
Confirm/Change Passkey
●
The passkey of Bluetooth can be confirmed and changed.
●
The passkey can be changed by four digits within 0 to 9.
Confirm/Change Device Name
●
The device name of Bluetooth can be confirmed and changed.
●
The device name can be changed by sixteen digits within A to Z
(small characters can be used) and - (hyphen).
DELETE UNIT CONNECTION LOG
Erase the connection history of unit and error history that is recorded
in AV (NAVI) control unit (clear the connection history of the removed
unit).
SKIB3669E
SKIB3670E
SKIB3671E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст