Infiniti M35/M45 Y50. Manual — part 951
MA-1
MAINTENANCE
L MAINTENANCE
CONTENTS
C
D
E
F
G
H
I
J
K
M
SECTION
MA
A
B
MA
MAINTENANCE
PREPARATION . . . . . . . . . . . . . . ... 3
Special Service Tools . . . . . . . . . . . ... 3
Commercial Service Tools . . . . . . . . . . 3
GENERAL MAINTENANCE . . . . . . . . . ... 4
Explanation of General Maintenance . . . . . ... 4
PERIODIC MAINTENANCE . . . . . . . . . ... 7
Introduction of Periodic Maintenance . . . . . ... 7
Schedule 1 . . . . . . . . . . . . . . . ... 8
Schedule 2 . . . . . . . . . . . . . . . . 10
RECOMMENDED FLUIDS AND LUBRICANTS . .. 12
ENGINE MAINTENANCE (VQ35DE ENGINE) . . . 14
Checking Drive Belts . . . . . . . . . . . .. 14
Tension Adjustment . . . . . . . . . . . . 14
Changing Engine Coolant . . . . . . . . . .. 15
Checking Fuel Lines . . . . . . . . . . . ... 18
Changing Air Cleaner Filter . . . . . . . . . 18
VISCOUS PAPER TYPE . . . . . . . . . . 18
Changing Engine Oil . . . . . . . . . . . .. 18
Changing Oil Filter . . . . . . . . . . . . . 19
Changing Spark Plugs (Platinum-Tipped Type) . . 20
REMOVAL . . . . . . . . . . . . . . ... 20
INSPECTION AFTER REMOVAL . . . . . ... 21
INSTALLATION . . . . . . . . . . . . ... 21
Checking EVAP Vapor Lines . . . . . . . . .. 21
ENGINE MAINTENANCE (VK45DE ENGINE) . . . 22
Checking Fuel Lines . . . . . . . . . . . ... 25
Changing Air Cleaner Filter . . . . . . . . . 25
VISCOUS PAPER TYPE . . . . . . . . . . 25
Changing Engine Oil . . . . . . . . . . . ... 25
Changing Oil Filter . . . . . . . . . . . . .. 26
Changing Spark Plugs (Platinum-Tipped Type) . .. 27
Checking EVAP Vapor Lines . . . . . . . . .. 28
CHASSIS AND BODY MAINTENANCE . . . . ... 29
REMOVAL . . . . . . . . . . . . . . ... 33
WHEEL BALANCE ADJUSTMENT . . . . . . 33
MA-2
CALIPER . . . . . . . . . . . . . . . . 36
PAD . . . . . . . . . . . . . . . . . . 36
Checking Steering Gear and Linkage . . . . . . 36
STEERING GEAR . . . . . . . . . . . ... 36
STEERING LINKAGE . . . . . . . . . . .. 36
SERVICE DATA AND SPECIFICATIONS (SDS) . .. 40
PREPARATION
MA-3
C
D
E
F
G
H
I
J
K
M
A
B
MA
PREPARATION
PFP:00002
Special Service Tools
NLS00078
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tools
NLS00079
Tool number
(Kent-Moore No.)
Tool name
Description
KV10115801
(J38956)
Oil filter wrench
Removing and installing oil filter
a: 64.3 mm (2.531 in)
S-NT375
Tool name
(Kent-Moore No.)
Description
Power tool
(
—
)
Loosening nuts and bolts
Spark plug wrench
(
—
)
Removing and installing spark plug
Belt tension gauge
(BT3373-F)
Checking drive belt tension (VQ35DE)
PBIC0190E
S-NT047
AMA126
MA-4
GENERAL MAINTENANCE
GENERAL MAINTENANCE
PFP:00000
Explanation of General Maintenance
NLS0007A
General maintenance includes those items which should be checked during the normal day-to-day operation
of the vehicle. They are essential if the vehicle is to continue operating properly. The owners can perform
checks and inspections themselves or they can have their INFINITI dealers do them.
OUTSIDE THE VEHICLE
The maintenance items listed here should be performed from time to time, unless otherwise specified.
Item
Reference page
Tires
Check the pressure with a gauge, including the spare, at least once a month
and always prior to a long distance trips. Adjust to the specified pressure if
necessary. Check carefully for damage, cuts or excessive wear.
—
Wheel nuts
When checking the tires, make sure no nuts are missing, and check for any
loose nuts. Tighten if necessary.
—
Windshield
Clean the windshield on a regular basis. Check the windshield at least every
six months for cracks or other damage. Repair as necessary.
—
Tire rotation
Tires should be rotated every 12,000 km (7,500 miles).
Wheel alignment and
balance
If the vehicle pulls to either side while driving on a straight and level road, or if
you detect uneven or abnormal tire wear, there may be a need for wheel align-
ment. If the steering wheel or seat vibrates at normal highway speeds, wheel
balancing may be needed.
(2WD),
(AWD)
Windshield wiper
blades
Check for cracks or wear if they do not wipe properly.
—
Doors and engine
hood
Check that all doors and the engine hood operate smoothly as well as the
trunk lid. Also make sure that all latches lock securely. Lubricate if necessary.
Make sure that the secondary latch keeps the hood from opening when the pri-
mary latch is released.
When driving in areas using road salt or other corrosive materials, check lubri-
cation frequently.
Lamps
Make sure that the headlamps, stop lamps, tail lamps, turn signal lamps, and
other lamps are all operating properly and installed securely. Also check head-
lamp aim. Clean the headlamps on a regular basis.
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст