Mitsubishi Lancer Evolution IX. Manual — part 125
![](/vehicles/winoney/wruvea/ger/olur.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-63
Step 5. Check the wiring harness from C-226
ETACS-ECU connector terminal No.12 and C-227
ETACS-ECU connector terminal No.22 to E-15
front door lock actuator (RH) connector terminal
Nos.4 and 6.
NOTE:
Prior to the wiring harness inspection, check interme-
diate connector C-110 and junction block connector
C-214, and repair if necessary.
• Check the input and output lines for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
Step 6. Connector check: E-04 front door lock
actuator (LH) connector
Q: Is the check result normal?
YES :
Go to Step 7.
NO :
Repair the defective connector.
AC310462
Connectors: C-226, C-227 <RHD>
AB
Junction block (rear view)
Junction block side
C-226
C-226
C-227
Harness side
C-227
28
37
43
29
44
38
23
32
41
24
25
26
27
34
42
36 35
33
21
22
30
39
40
31
AC310493
Harness side
AF
Connector: E-15 <RHD>
E-15 (B)
AC310456
Connector: C-110 <RHD>
AH
AC310458
Harness side
Junction block (front view)
Connector: C-214 <RHD>
AE
21
7
16 15
17
18
20 19
1
2
3
4
5
6
23 22
24
25
28
26
27
9
8
10
11
14
12
13
AC310498
Connector: E-04 <RHD>
AF
Harness side
E-04 (B)
![](/vehicles/winoney/wruvea/ger/heayp.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-64
Step 7. Check the front door lock actuator (LH).
Check that the front door lock actuator (RH) works
normally. Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Replace the front door lock actuator (LH).
Step 8. Connector check: C-226 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Repair the defective connector.
Step 9. Check the wiring harness from C-226
ETACS-ECU connector terminal Nos.12 and 13 to
E-04 front door lock actuator (LH) connector
terminal Nos.4 and 6.
NOTE:
Prior to the wiring harness inspection, check interme-
diate connector C-17 and junction block connector
C-214, and repair if necessary.
• Check the input and output lines for open circuit.
AC310461
Connector: C-226 <RHD>
AE
Junction block side
Junction block
(rear view)
AC310461
Connector: C-226 <RHD>
AE
Junction block side
Junction block
(rear view)
AC310498
Connector: E-04 <RHD>
AF
Harness side
E-04 (B)
AC310454
Connector: C-17 <RHD>
AH
AC310458
Harness side
Junction block (front view)
Connector: C-214 <RHD>
AE
21
7
16 15
17
18
20 19
1
2
3
4
5
6
23 22
24
25
28
26
27
9
8
10
11
14
12
13
![](/vehicles/winoney/wruvea/ger/ngoe.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-65
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
Step 10. Connector check: E-18 rear door lock
actuator (RH) connector
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Repair the defective connector.
Step 11. Check the rear door lock actuator (RH).
Check that the rear door lock actuator (RH) is in
good condition. Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 12.
NO :
Replace the rear door lock actuator (RH).
Step 12. Connector check: C-226 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the defective connector.
Step 13. Check the wiring harness from C-226
ETACS-ECU connector terminal Nos.12 and 13 to
E-18 rear door lock actuator (RH) connector
terminal Nos.4 and 6.
NOTE:
Prior to the wiring harness inspection, check interme-
diate connector D-04, and repair if necessary.
• Check the input and output lines for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
AC310495
Harness side
AE
Connector: E-18
E-18 (B)
AC310461
Connector: C-226 <RHD>
AE
Junction block side
Junction block
(rear view)
AC310461
Connector: C-226 <RHD>
AE
Junction block side
Junction block
(rear view)
AC310495
Harness side
AE
Connector: E-18
E-18 (B)
AC310471
Connector: D-04 <RHD>
AC
![](/vehicles/winoney/wruvea/ger/eneron.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-66
Step 14. Connector check: E-07 rear door lock
actuator (LH) connector
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Repair the defective connector.
Step 15. Check the rear door lock actuator (LH).
Check that the rear door lock actuator (LH) is in good
condition. Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 16.
NO :
Replace the rear door lock actuator (LH).
Step 16. Connector check: C-226 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 17.
NO :
Repair the defective connector.
Step 17. Check the wiring harness from C-226
ETACS-ECU connector terminal Nos.12 and 13 to
E-07 rear door lock actuator (LH) connector
terminal Nos.4 and 6.
AC310500
Harness side
AB
Connector: E-07
E-07 (B)
AC310461
Connector: C-226 <RHD>
AE
Junction block side
Junction block
(rear view)
AC310461
Connector: C-226 <RHD>
AE
Junction block side
Junction block
(rear view)
AC310500
Harness side
AB
Connector: E-07
E-07 (B)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст