Mitsubishi Lancer Evolution IX. Manual — part 208
![](/vehicles/winoney/wruvea/ger/loout.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-91
INSPECTION PROCEDURE D-2: Driver's power window does not work by means of the power window
main switch. <RH drive vehicles>
COMMENTS ON TROUBLE SYMPTOM
If the driver's power window does not work by means
of the power window main switch, the power window
main switch or the driver's door power window regu-
lator motor may be defective.
POSSIBLE CAUSES
• Malfunction of the power window main switch
• Malfunction of the front power window regulator
motor (RH)
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
STEP 1. Check the power window main switch.
Check that all of the front passenger's and rear door
power windows can operate by means of the power
window main switch.
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Refer to Inspection Procedure D-1 "Power
windows do not work at all
."
POWER WINDOW
RELAY
POWER
WINDOW
MAIN SWITCH
FRONT
(RH)
POWER WINDOW
MOTOR
(FRONT: RH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Power Window (front: RH) Circuit <RHD>
CPU
![](/vehicles/winoney/wruvea/ger/jeeingti.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-92
STEP 2. Connector check: E-05 power window
main switch connector and E-11 front power
window regulator motor (RH) connector
Q: Are the check results normal?
YES :
Go to Step 3.
NO :
Repair the connector.
STEP 3. Check the wiring harness from E-11 front
power window regulator motor (RH) connector
terminal Nos.1 and 4 to E-05 power window main
switch connector terminal Nos.7 and 1.
• Check the input and output lines for open or short
circuit.
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the wiring harness.
STEP 4. Retest the system.
After the power window main switch is replaced,
check that the driver's door power window can be
operated by the power window main switch.
(1) Replace the power window main switch.
(2) Check that the driver's power window works by
means of the power window main switch.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the front power window regulator
motor assembly (RH).
AC310494
10
1
6
14
5
12
13
4
11
7
2
3
8
9
AC310494
Connectors: E-05, E-11 <RHD>
E-11
E-05
Harness side
Harness side
E-05
E-11 (GR)
AB
Front door (RH)
AC310494
10
1
6
14
5
12
13
4
11
7
2
3
8
9
AC310494
Connectors: E-05, E-11 <RHD>
E-11
E-05
Harness side
Harness side
E-05
E-11 (GR)
AB
Front door (RH)
![](/vehicles/winoney/wruvea/ger/bleer.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-93
INSPECTION PROCEDURE D-3: Relevant power window(s) do not work by means of the front and
rear passenger's power window sub switches.
FUSIBLE
LINK
ETACS-
ECU
POWER
WINDOW MOTOR
(FRONT: RH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
POWER
WINDOW SUB SWITCH
(FRONT)
5
POWER
WINDOW
RELAY
CPU
Power Window (front: RH) Circuit <LHD>
![](/vehicles/winoney/wruvea/ger/tsearkes.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-94
FUSIBLE
LINK
ETACS-
ECU
POWER
WINDOW MOTOR
(FRONT: LH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
POWER
WINDOW SUB SWITCH
(FRONT)
5
POWER
WINDOW
RELAY
CPU
Power Window (front: LH) Circuit <RHD>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст